first steps with REW

arivel

Registered
Thread Starter
Joined
Jul 5, 2022
Messages
32
I understood little but I deduce that after having done it it is better not to touch anything anymore.
 

arivel

Registered
Thread Starter
Joined
Jul 5, 2022
Messages
32
i did some measurements with karlson K12. I would like to get two separate graphs. one for direct radiation and one for rear speaker radiation which passes from the rear chamber to the anterior chamber through two reflex ports. I thought of using a diode between the sound card and the marantz amplifier on the wire (R) but before doing that I want to ask if it works. I suspect that the loudspeaker does not work well this way.
 

John Mulcahy

REW Author
Joined
Apr 3, 2017
Messages
7,212
I thought of using a diode between the sound card and the marantz amplifier on the wire (R) but before doing that I want to ask if it works.
Absolutely not. To measure the port output put a mic next to the port.
 
Top Bottom