Audio_Guy_UofW
Member
Thread Starter
- Joined
- Sep 2, 2020
- Messages
- 42
More
- Preamp, Processor or Receiver
- Denon AVR-4700
- Main Amp
- Neurochrome Modulus 686 for music
- Additional Amp
- Topping Pre90 preamp for music
- Computer Audio
- Roon
- DAC
- SMSL M500
- Universal / Blu-ray / CD Player
- Panasonic DP UB-820; Oppo UDP-203
- Front Speakers
- PSB Imagine X2T, Magnepan 1.7i (for music)
- Center Channel Speaker
- PSB Imagine XC
- Surround Speakers
- PSB Alpha
- Surround Back Speakers
- PSB Alpha Mini
- Front Height Speakers
- Totem KIN IC6 Slim (Front O/H)
- Rear Height Speakers
- Totem KIN IC6 Slim (Rear O/H))
- Subwoofers
- 4 sealed subs with 12" drivers custom built boxes
- Other Speakers or Equipment
- Mini DSP 2x4 Balanced; HD Fury Diva; MSO sub tunin
- Video Display Device
- JVC DLA X500
- Screen
- EluneVision 96" Acoustically Transparent
- Remote Control
- Harmony Elite
- Streaming Equipment
- Nvidia Shield Pro; Roopiee Raspberry Pi
- Streaming Subscriptions
- Tidal
- Other Equipment
- Thorens TD-160 Super, SME tonearm, Shure V15 IV with Jico SAS stylus, Arcam rPhono preamp
Hi, I am working with offsets to EQ a speaker response, as described in a previous post. Today when I applied an offset to a new curve, the legend display of the SPL was still showing the original value, rather than the value of the offset curve.
See attached. I check with a previous offset curve, and it was showing the offset value, not the original. I closed and reopened REW, loaded the data, and same results. Suggestions?
Thanks.
See attached. I check with a previous offset curve, and it was showing the offset value, not the original. I closed and reopened REW, loaded the data, and same results. Suggestions?
Thanks.
