Eric SVL
Member
Thread Starter
- Joined
- May 1, 2017
- Messages
- 173
More
- Preamp, Processor or Receiver
- Denon AVR-X4500H
- Main Amp
- Hypex NCore NC252MP
- Computer Audio
- iLoud MTM
- DAC
- Micca OriGen G2
- Universal / Blu-ray / CD Player
- Sony PS3, PS4
- Front Speakers
- Buchardt S400
- Surround Speakers
- Polk LSiM 702
- Front Height Speakers
- Focal Chorus OD 706 V
- Rear Height Speakers
- Focal Chorus OD 706 V
- Subwoofers
- Rythmik
- Other Speakers or Equipment
- ELAC Debut Reference DFR52
- Screen
- Samsung PN64H5000
- Streaming Equipment
- Google Chromecast
- Streaming Subscriptions
- GIK Tri-Traps
Building on the excellent measurement process already in place, perhaps REW could package the results into a dashboard view for easy reference.
It could display frequency response with an adjustable +/- dB highlight, strength of early reflections, early vs late sound ratio, RT60, spectrograph, and more.
The more information it has acquired, the more it could show. So if multiple channels are measured, it could show an impulse/timing alignment error on the dashboard.
Of course screen space is limited so it must be clean and uncluttered.
It would certainly make sharing results so much easier. Export as one big PNG for forum or support use. Only if a deeper dive is required would mdat files need to trade hands.
Just an idea. I have lots
It could display frequency response with an adjustable +/- dB highlight, strength of early reflections, early vs late sound ratio, RT60, spectrograph, and more.
The more information it has acquired, the more it could show. So if multiple channels are measured, it could show an impulse/timing alignment error on the dashboard.
Of course screen space is limited so it must be clean and uncluttered.
It would certainly make sharing results so much easier. Export as one big PNG for forum or support use. Only if a deeper dive is required would mdat files need to trade hands.
Just an idea. I have lots
