Dear REW Forum,
Good day,
Before purchasing a new audio interface, I would like to ask whether my current sound card, the Focusrite Scarlett Solo 3rd Gen, is suitable for performing T/S parameter measurements using REW.
According to the diagram provided for T/S measurements, it requires one output and two line-level inputs (L/R). The Scarlett Solo has the following configuration:
I would like to ask:
Thank you in advance for your help and for the excellent tool you’ve developed.
Best regards spyros-
Good day,
Before purchasing a new audio interface, I would like to ask whether my current sound card, the Focusrite Scarlett Solo 3rd Gen, is suitable for performing T/S parameter measurements using REW.
According to the diagram provided for T/S measurements, it requires one output and two line-level inputs (L/R). The Scarlett Solo has the following configuration:
- 1 line output (L/R) via RCA
- 1 line/instrument input (TRS)
- 1 microphone input (XLR)
I would like to ask:
- Can this interface be used for T/S measurements in REW with reliable results?
- Is it possible to use the mic input as the second input without enabling phantom power (48V), or would this still affect the accuracy due to different gain structure or impedance?
- If this interface is not sufficient, what are the minimum required specifications for a compatible audio interface for T/S measurements?
Thank you in advance for your help and for the excellent tool you’ve developed.
Best regards spyros-
