Captured

[twelti76]

I haven't often looked at the "Captured" data. Seems like when I do there is nothing there. I've zoomed in/out to full exents, don't see anything. The measurement itself (transfer function) looks fine, just some excessive pre-ringing on one measurement, and I was curious to see the raw data. I note that the checkboxes at bottom of "Captured" screen are greyed out. This was a log sweep measurement, 2 channel using pro upgrade.

 

[John Mulcahy]

The captured data is only shown for the most recent measurement made. It is not retained as there is a lot of data in the raw capture.

 

[twelti76]

The captured data is only shown for the most recent measurement made. It is not retained as there is a lot of data in the raw capture.

Ah, that does sound familiar now that you mention it. Thanks.

 

[twelti76]

It would be a nice option to be able to retain the captured data. I find it useful sometimes. I don't think my current laptop would break a sweat, storage-wise. Might not be that trivial to code though I guess.