4 subwoofers, 2 amps, 1st REW

[gadgetfreak]

Spent 8hrs on this plus so far.. not sure i'm doing it right. But Here's where I'm at.

I have 4 subs total. 2 B&W CT SW12 up front powered by 1 SA1000 1,000W amp, and the same right above m haning above. So 2 subs up front powered by 1 amp, 2 subs in rear powered by 1 amp. I'm just running it out of mini dsp output 1 and 3

I followed the video in the setup post. I adjusted PEQ on input to take a few peaks and valleys as well. Here's what I got. would love any advice of what settings I should tweak. I'm a bit disappointed that this sub doens't go ver low. I am trying to get that chest hitting explosion, so seeing if I need to upgrade 2 of the subs or not.

would love to know if im doing this right.

Red is rear subs
Green is front

blue is after EQ measured.

 

[Wayne A. Pflughaupt]

I’m puzzled, the top graph shows a room curve, but the other does not. Is one of these combined response with all subs running simultaneously?

Your waterfall needs to be scaled for something like 35 dB – 90 dB.

BTW, that “chest hit” thing is up in the 60-70 Hz range, not 20 Hz...

Regards,
Wayne