Recent content by Thomas Larsen

  1. T

    REW - hoursecurves and the Minidsp

    Hi thank you so much for bringing me in that direction - this was exactly what I was after. Only thing now - it does not stop at 30 hz but contrinues upwards - but now it's at the same level. Config 1 is flat and then LS filter at 30 hz Q 0.7 and then 4 db, 6 db and 8 db (maybe too much - will...
  2. T

    REW - hoursecurves and the Minidsp

    Hi have this idea to use the 4 presets on the Minidsp 2x4 HD (have the remote) and use different configs and house curves. P1 should be a flat one and then I will use REW to calculate the house curve - from 100 hz to 30 hz and then rise 3.5, 4.5 and 5.5 - will give me around 6, 8, 10 db at 30 hz...
  3. T

    Minidsp 2x4 hd vs avg meassurement

    Hi saw on minidsp homepage that their tutorials has changed regarding REW and subwoofer meassurements. They recommend that you meassure more e.g. 3 positions and then use the avg. response for yor EQ. How many use that ? I always only use one position in the MLP and eq that. The multi position...
  4. T

    Best practise - REW and UMIK-1

    Thank you for your reply. Yes it was asio4all. I will then only use the 0 db setting for my 18 db umik-1. Next time I will try to use java and see how that works. Using windows java - I can then only use left, right or both. Also if I connect hdmi to reciever - same only left, right and both...
  5. T

    Best practise - REW and UMIK-1

    Hi I've played with this for quite some time and things still puzzles me. When using java do you use built in windows 10 java or download from java.com ? Is java more reliable than ASIO ? For some reason - when I use ASIO 2.14 I have problems with the meassurements and sound when EQ'ed into my...
  6. T

    Subwoofer level using Umik-1

    hmm 90 deg. cal file loaded but I did get some clipping with the +9.9 db setting and meassurement with -12 dbfs. Will try to play with it at 0.0 db and then pick a recording level that kind of matches my receivers output level like 0.0 should be 85 if I pick -20 right ?! Only way forward is to...
  7. T

    Subwoofer level using Umik-1

    Hi hmm just learned that I have set it up wrong :( . My umik-1 is the 18 db gain version. I followed the "Jerry" guide doc and here it tells you to set windows 10 mic level to 81 % / 9.9 +. But he is using the 12 db version of the mic. Some other place I found someone else have the 18 db version...
  8. T

    Room curve questions

    Hi something is wrong. What mic are you using ? I use Umik-1 and using the 90 degree cal file loaded. Meassure at -12 dbfs and have the mic at 81 % in the windows setting. I use ASIO and not java. When I do flat on my V1800 subwoofer (some models prior to your 1812) I reach down to 14-15 hz...
  9. T

    Subwoofer level using Umik-1

    Hi the individual boost / overall boost is in the EQ section under filter options.Where you make filters for your MiniDSP and save the file. My sub is an older PSA V1800 sub. So far I did not hear anything bad - made one config for as flat as possible and then another one with room curve - 100...
  10. T

    Subwoofer level using Umik-1

    Hi - just bought the minidsp 2x4hd and had fun the whole day. Also have the Umik-1 (the 18 db version). Now I have a super flat response. I wanted to calibrate levels using this Umik and went for pink and white noise speaker calib -30 dbfs that should be 75 db target level. All fine but what...
Top Bottom