-
-
Ddcibel replied to the thread REW Beta Release REW API beta releases.Thank you :)
-
Ddcibel replied to the thread REW Beta Release REW API beta releases.Minor annoyance - On ALL SPL chart, if there is an impedance measurement in my data set, using "align SPL" creates the following error...
-
-
Ddcibel reacted to John Mulcahy's post in the thread REW Beta Release REW API beta releases with
Like.
I'll add DIM30 and DIM100 in the next build. -
DYour answer helped me determine there is a scale field in vituixcad IR-FR tool which was set to a default 100dB, setting it to 110.9dB...
-
Ddcibel replied to the thread REW Beta Release REW API beta releases.Interesting, DIM30 appears to come from IEC 60268-3 spec...
-
Ddcibel replied to the thread FSAF (Fast subband adaptive filtering) measurement.I think I wouldn't be surprised that a little micro-monitor with 3.5" driver struggles will bass, even at a relatively low volume...
-
-
Ddcibel replied to the thread REW Beta Release REW API beta releases.Ok, I found "DIM" in the ARTA manual, but still don't know what the D stands for. I don't think REW's generator will do a square+sine...
-
-
Ddcibel replied to the thread REW Beta Release REW API beta releases.DIM? In REW you can measure inter-modulation using the signal generator and RTA. The signal generator is quite powerful to define a...
-
Ddcibel replied to the thread Professional Services to Assist with REW.You might try this guy: https://accuratesound.ca/digital-room-correction-drc-calibration/ @Mitchco
-
Ddcibel reacted to John Mulcahy's post in the thread FSAF (Fast subband adaptive filtering) measurement with Like.
Changing the tweeter delay does not change non-linear distortion, it changes the linear response at the measurement point from the sum...
-
Ddcibel replied to the thread REW Beta Release REW API beta releases.Reposting my request here as it may have been lost in the ongoing confusion of the FSAF thread. For FSAF, currently to evaluate the...
-
Ddcibel reacted to John Mulcahy's post in the thread REW Beta Release REW API beta releases with Like.
Builds updated today (beta 134) with these changes: Added: AirDSP by Acoustas equaliser entries support two crossover filters Fixed...
-
Ddcibel replied to the thread FSAF (Fast subband adaptive filtering) measurement.SPL tab shows the frequency response of the measured device. Distortion tab shows the spectrum of the recorded audio. You can use many...
-
Ddcibel replied to the thread FSAF (Fast subband adaptive filtering) measurement.Result is total distortion and noise, everything that is not in the original audio. When there is nothing in the original audio...
-
Ddcibel replied to the thread FSAF (Fast subband adaptive filtering) measurement.The other thing to note is that REW distortion tab for FSAF shows very limited information. It's just the spectrum of the entire...
-
-
Loading…
-
Loading…
