-
-
DDanDan replied to the thread John Mulcahy - Creator of REW!.UP CORK John, Rory Gallagher, Me.....
-
DDanDan replied to the thread Before EQ and after EQ measurements - please advise if this is correct.Are you Measuring One Speaker or Both Together? https://www.irishacoustics.com/forum/measurement-and-control/acoustic-measurement-primer
-
DDanDan replied to the thread Use REW to analyze recorded acoustic noise ?.I was wondering whether Audacity would record the UMIK mic bits without alteration and whether REW could work with files. I very much...
-
DDanDan replied to the thread Right speaker reflection issues.Are you referring to the Reflection at about 10mS? That reflection had to travel about 10 feet.
-
DDanDan replied to the thread 2.1 Focal system, questions about measuring L+R channels together.LOL, I look at my dorky self in the mirror when shaving every morning and I ask myself...... Am I An Artist? Sometimes when trying to...
-
DDanDan replied to the thread Signal Generator - Calibrate Level - strange behaviour.Ah, good to know. John Mulcahy many confirm this, but I suspect that the SPL Meter in REW is probably very very good when used with any...
-
DDanDan replied to the thread 2.1 Focal system, questions about measuring L+R channels together.Thats a Sherlock Holmes job....... Move the mic. Modes do not change frequency but Reflection issues do. Typically if you get nearer to...
-
-
DDanDan replied to the thread 2.1 Focal system, questions about measuring L+R channels together.My main DRC is Dirac Live. It doesn't tell you directly if your mic is equidistant, it just generates an offset delay which you can...
-
-
DDanDan replied to the thread 2.1 Focal system, questions about measuring L+R channels together.Sorry sm52, that was not my point. I was referring to the comb filtering and widening caused by inserting a 'speaker position offset'...
-
DDanDan replied to the thread Signal Generator - Calibrate Level - strange behaviour.I used 200Hz for no particular reason. Fluke 87 Meter. It tracks precisely. Have you tried using the Meter in REW? Again mine tracked...
-
DDanDan replied to the thread Setup for preamp's frequency response with REW.As John said, pretty easy. There is of course no Cal or Loopback involved. Simply connect on Input and one Output to REW. I measured...
-
DDanDan replied to the thread 2.1 Focal system, questions about measuring L+R channels together.Unless the distance from each tweeter to the mic is identical there will be a small time delay between the channels causing comb...
-
DDanDan replied to the thread configuration of REW with a babyface RME and a mac M1 pro.I think Mic/Line 1 is the onboard Mac input.
-
DDanDan replied to the thread Signal Generator - Calibrate Level - strange behaviour.Phil, may I suggest you make a new post or question regarding what you are trying to do. If you are troubleshooting your REW rig, is...
-
DDanDan replied to the thread Signal Generator - Calibrate Level - strange behaviour.OK, Volume up full, Generator at max (-3dB) Left output only. 200Hz. I measure 1.4VRMS Taking it down 6dB to -9dBFS I measure 0.7VRMS...
-
-
Loading…
-
Loading…
