-
-
FargateOne replied to the thread What could be causing this spike at 60Hz?.and help! Thanks. -
FargateOne reacted to JStewart's post in the thread What could be causing this spike at 60Hz? with
Like.
Good to hear you’ve resolved it! With no small effort either! -
FargateOne replied to the thread What could be causing this spike at 60Hz?.Hi sir, final report. I returned the laptop to get an other one. Umik-2 + good usb connection + setting 2channels 24 bits 48000Hz...
-
FargateOne replied to the thread What could be causing this spike at 60Hz?.It was after 9 points measurements. Didn't trust it. I did an other run (I forgot to print screen mic level. I had -6.5dB for the...
-
-
FargateOne replied to the thread What could be causing this spike at 60Hz?.Flax said yesterday to set Umik-2 sample rate at 48KHz for Dirac so now 2 channels 24 bits 48KHz new round with those mic levels...
-
-
FargateOne replied to the thread What could be causing this spike at 60Hz?.It is why you see -16.9dB in sub channels for the same slider leve as the satellites at -5.0dB. Maybe you will find interesting to know...
-
-
FargateOne replied to the thread What could be causing this spike at 60Hz?.With Umik-1 I always had this 4dB headroom as shownd in #41 first image. I was thinking that I could have the same headroom with Umik-2...
-
FargateOne replied to the thread What could be causing this spike at 60Hz?.Thanks those are best practices followed religiously. since 10 years with the old mic when a couple of weeks ago it give the spike at...
-
FargateOne replied to the thread What could be causing this spike at 60Hz?.Report.. AVR main vol at 56. GREEN = Umik-1 Center 2 subs off DLBC xo92 on RED = Umik-2 Center 2 subs off DLBC xo92 on The SPL...
-
-
FargateOne replied to the thread What could be causing this spike at 60Hz?.Neither do I to be honest! Yes he had one of my 1 000,000,0...mdat files
-
FargateOne replied to the thread What could be causing this spike at 60Hz?.I sure have a lot.To test it should I : @markus is back in AVSForum. During the investigation into DLBC above v3.4.4 and following...
-
FargateOne replied to the thread What could be causing this spike at 60Hz?.I will not. Not after all effort done to get DLBC above 3.4.4 to work finally with Arcam receivers. I just received infos from Dirac...
-
FargateOne replied to the thread What could be causing this spike at 60Hz?.After reinstalled Dirac and drivers for Umik-2 and super quiet room For those mice levels I got those trims. I need to raise the AVR...
-
-
FargateOne replied to the thread What could be causing this spike at 60Hz?.Yes . I moved 1 sub to please my wife so only the last Umik-1 DLBC measurements are reliable with those I take with the new mic...and I...
-
-
FargateOne replied to the thread What could be causing this spike at 60Hz?.I calibrate Dirac with the old and did it again with the Umik-2. All others settings (mlp etc. ) are equal. Now I took a closer look at...
-
-
-
Loading…
-
Loading…
