-
-
OOfer replied to the thread Audiolense - jriver routing question.Can you post a picture of your target before correction?
-
OLuckily it was only sending wrong signals to woofers but also because of worries about blowing tweeters I have stuck some big Mundorf...
-
OOfer replied to the thread Audiolense - jriver routing question.Good thing you didn't blow a driver because of this. Seems like Motu decided to imitate the RME user (un)friendly interface :)
-
OOfer replied to the thread Audiolense - jriver routing question.Yes
-
OOfer replied to the thread Audiolense - jriver routing question.This might not be connected but try to cross the sub at 80 and 80.1hz. Sometimes this sets things right when offloading to the sub.
-
OTotally awesome for your kind feedback! You really helped me a lot 👏🏻
-
OOfer replied to the thread Beginner trying to figure stuff out..Looks like the crossover is at ~60hz. Kind of makes sense as this is where you base hump start to drop. Meaning that the sub outputs...
-
OOfer replied to the thread Beginner trying to figure stuff out..OK. That explains the extension to 30hz. From the picture it seems that the sub is almost on the same plain as the speakers. That is why...
-
OOfer replied to the thread Beginner trying to figure stuff out..The measurements you post, the sub is playing in those measurements?
-
OOfer replied to the thread Beginner trying to figure stuff out..Nice, I see you are reluctant to add the sub. Can understand, or am I missing something?
-
OOfer replied to the thread Beginner trying to figure stuff out..Yeah it looks good. I recommend giving each new procedure another name. That way it would be easier for you to play with them. Also a...
-
OOfer replied to the thread Beginner trying to figure stuff out..Ok. Looks good. Glad to hear it sounds good too. Did you try a mixed target curve? You can try to follow the decline you have in the...
-
OOfer replied to the thread Beginner trying to figure stuff out..Try Mitch book too. It is on Accurate but a lot of the same principles apply here. In the filter designer try playing with the "true...
-
OOfer replied to the thread Beginner trying to figure stuff out..You are either very lucky and you don't need a sub or the connection has somehow changed. In the uncorrected response both(!) speakers...
-
OOfer replied to the thread Beginner trying to figure stuff out..Just to be clear. The measurments you posted are with the sub running as a right speaker? is it still connected as you previously...
-
-
Loading…
-
Loading…
