-
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.maybe when use music which contain transients and timing it is diffrent...
-
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.the original for distortion i have add in the FSAF File selector. or that there is a Import audio FSAF which let choose the original...
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.@John Mulcahy import audio do not work to load music audio so FSAF distortion is calculate from that importete audio. How can i do that...
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.then you can show FSAF results of basstest or drumtest wav diffrence here too. I do not understand wy you post results of a incomplete...
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.You can also show an example if that can work(if you find this usefull) here can see step response of a good time aligned speaker...
-
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.here i have a drumloop 3 test. level is below 0 db it do no clipping but i need reduce measure level to -13 db at least to get no...
-
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.yes i notice that too, because the transients are always louder in the residuals than in the original, which mean that the speakers are...
-
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.Personally, I find real-world, practical results to be the most important. I have never used MATLAB in my life. That being said, I...
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.to calibrate you need a reference mic whre to know the FR. cheap measure microphones have large diffrence between same time. because i...
-
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.First: i remember i forget to say how i use REW audio. I use always Asio driver so this is perfect sync asio can report buffer size and...
-
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.before i have in this post upload the mdat file...
-
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.and why when there are frequencies not in, does it show such a high distortion value ?. normaly it should show on high frequencies the %...
-
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.yes this i mean, with the ESI or headphone only problem is the distortion display. the FR is near same when do a sine sweep or FSAF...
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.Can yout test please how distortion look on your speaker and system with the 96 hz burst .wav i upload in the burst pack and post the...
-
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.here is FSAF measure and 200 hz burst waveform view and i use lower level. SNR also good, now high distortions begin at 400 hz. but good...
-
-
-
Loading…
-
Loading…
