user44455555's latest activity
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.and why when there are frequencies not in, does it show such a high distortion value ?. normaly it should show on high frequencies the %...
-
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.yes this i mean, with the ESI or headphone only problem is the distortion display. the FR is near same when do a sine sweep or FSAF...
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.Can yout test please how distortion look on your speaker and system with the 96 hz burst .wav i upload in the burst pack and post the...
-
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.here is FSAF measure and 200 hz burst waveform view and i use lower level. SNR also good, now high distortions begin at 400 hz. but good...
-
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.how i can see easy which measure it is. ? there are only such numbers. I use newest beta 133
-
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.here i do burst measure of 96 hz sine tone. distortion of harmonics look very high. because distortion on 96 hz is very low, seem SNR is...
-
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.with the ESI unik 05+ and ribbon tweeter it work good when measure no bassport or too near. . the others and dome tweeter work not. to...
-
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.The wav send to speaker is drumtest. how can i get the wav that is record from microphone ?. i can save FSAF residual (attached) but is...
-
Uuser44455555 replied to the thread FSAF (Fast subband adaptive filtering) measurement.I try FSAF measure with some speakers.the only that get a correct FR was the ESI unik 05. i do this several times. only when i try...
-
-
Uuser44455555 replied to the thread how can see port noise in measures, or how measure port noise best ?.I do also RTA. see 2.screenshot in the 1 post. it did show fewer. for the rta is used 84 db at 1 meter and at microphone level was 102...
-
Uuser44455555 posted the thread how can see port noise in measures, or how measure port noise best ? in Official REW (Room EQ Wizard) Support Forum.Hi In this thread...
-
-
Uuser44455555 replied to the thread Klippel NFS vs. Real Physics: How Klippel Sound Field Separation Erases Real Enclosure Resonances show with Klippel examples.another screenshot that Klippel sound field Separation did not work correct at low frequency Level at time Cursor display show that...
-
-
Uuser44455555 replied to the thread how does harmonic distortion add in generator work. does it add a sine wave with level and phase or jitter sine wave ?.here is the test. rew generator is a easy way to test, you can also use audacity create 2 tracks. 1 track with sine 60 hz and delay...
-
-
Uuser44455555 posted the thread Klippel NFS vs. Real Physics: How Klippel Sound Field Separation Erases Real Enclosure Resonances show with Klippel examples in Official REW (Room EQ Wizard) Support Forum.Hi all and @Erin I compared the raw Free-Field Measurement with Klippel's calculated Direct Sound Only model using the Sound Field...
-
-
Uuser44455555 replied to the thread REW Beta Release REW API beta releases.I try to use burst decay. much settings for it i see not and so i notice it seem show wrong values. correct is for 96 hz 4-6 cycles. see...
-
