I did made input and output selections on the REW soundcard preferences ,but some times,it is not show on the measure page.i did again.
and you right,5.20.3 doesn't make the validity check, that doesn't mean the result is valid.
i think someting wrong with this soundcard,not just DC .
now,im sure about some thing:
(1)5.20.3 impedance calibration and measurement is working,
(2)5.20.4 fail on impedance short calibration,i don't know why.
(3)“hi pass” is working,but level meter display on measure page looks wrong.
And have some suggestions. LPF and HPF should be added and the...
i just try to use 5.20.3, impedance can be calibrate and measurement.input level meter on measure page looks same.i don't know why it works,let me try more and tell you
Hi John~
Today i trying to use a soundcard to measurement impedance,but looks like hi pass not working on measurement(but works on levels),so i can"t do imp cal. It will be great if hi pass works again;)
And,rew can be add a“microphone amplifier gain seting”,when microphone amplifier change gain will be no longer need recalibrate 94db spl。
And,if rew can just input microphone sensitive data(like 12mV/Pa,or -40dBV/Pa),will be very nice,no “94db spl calibration”need。
And,it will be helpful if rew can save microphone sensitive calibration data to file,like i have 2 microphones,if i switch microphone,rew need recalibrate 94db spl。
Hi,do you have any plan to add full iso3382 measurement ?Something very useful like STI。
:rubeyes:
And,if rew have “limit curves”(can be modified) will be very helpful to tell if loudspeaker system fit hifi standard like IEC60581。
really need rew to read the soundcheck“s data。some times,the sc data freq is high to low, (the rew data freq is low to high),i think that"s why rew can not read soundcheck data
How to know the speaker system is hifi? Limit will help you judge. Limit can be added, for example (frequency response, thd, impedance). Limit tool will help you to make limit with measurement results。
In the graphic display interface, it should show pass or fail..
Limit should have at least 2...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.