Wayne A. Pflughaupt
Latest Activity Postings Media Albums About
-
-
Wayne A. Pflughaupt replied to the thread Thanks for the add.Welcome to the Forum! Hard to follow all that, but it seems to me that trying to time-align subs with three different sets if... -
You have likely made an error with your measurement. You are also displaying your frequency response too zoomed out. Please read Book 1...
-
Wayne A. Pflughaupt replied to the thread Mic recommendation for REW.Why not just get a miniDSP UMIK-1? Much cheaper than the Presonus and it comes with a calibration file. Regards, Wayne
-
Wayne A. Pflughaupt replied to the thread How to eq sub only and intergrate with mains.Judging from your mains-only measurement, it appears you’ll have to limit subwoofer EQ to 40 Hz and below. From the readings in your...
-
Wayne A. Pflughaupt replied to the thread How to eq sub only and intergrate with mains.Yes, I understood the problem from what you described in your first post. Give us a full-range measurement of each of your main...
-
Wayne A. Pflughaupt replied to the thread How to eq sub only and intergrate with mains.The best way to keep subs from interfering with the main speakers is to high pass the latter, thereby allowing the subwoofer to handle...
-
Wayne A. Pflughaupt reacted to DL_Can's post in the thread Trying to fix possible bass null in my room - help please with
Like.
Well, a little more playing around with the noise cancelling setting and.....voila! Thank you @JStewart! Much better readings now. Looks... -
Wayne A. Pflughaupt replied to the thread Trying to fix possible bass null in my room - help please.The room diagram certainly helps. A big part of the problem is that your listening position is in the dead-center of the room. The...
-
-
Wayne A. Pflughaupt reacted to Todd Anderson's post in the thread AVR solutions that output room correction/EQ over HDMI? with Like.
Wayne from AV NIRVANA :T:rolleyes:
-
Wayne A. Pflughaupt replied to the thread AVR solutions that output room correction/EQ over HDMI?.First, welcome to the Forum! I don’t see how this idea would work. Assuming the AVR’s HDMI output would include the room correction...
-
Wayne A. Pflughaupt replied to the thread Anyone use REW to detemrine EQ for mains?.Well, the name is “Room” EQ Wizard. 1kHz is beyond the range where “room“ affects (i.e. modes and such – John, correct me if I’m...
-
Wayne A. Pflughaupt replied to the thread REW Beta Release HF roll-off where none should exist!?.Make sure the calibration file and mic orientation are the same – 0-degree file for aimed-at-speaker measurement, or 90-degree for...
-
Wayne A. Pflughaupt replied to the thread Room layout (plan).The dead center of any square or rectangular room is going to be a "bass hole," so to speak. I.e., the perceived bass level is lowest...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
