Recent content by specht007

Got rid of the AVP and will do another try with 5.2 sans Atmos. In this scenario I would route my Smart TV via Toslink to the Motu. @hulkss or others using a Motu - would 5.2 work for Netflix, TV sound etc this way or am I missing something?

It's working, thanks @hulkss . There's just something not right with the channel routing, but I guess I'll find out.

@hulkss - could you help me out with the correct routing for my MOTU? I am not able yet to get sound from my AVP to the Outputs of my MOTU when applying convolution. I've attached the routing matrix. Any idea what's the problem? I's not the AVP nor the MOTU, with this simple Input/Output...

If the question is whether more subs make sense or where you should put them you can check this out in REW: However In my case according to REW 4 subs were worse than 2 theortically, but in real life they were delivering a better performance: 4 subs 2 subs Your experimental sub...

That was the real problem as it seems. Donwloaded some Dolby testfiles and got all channels exept for the Atmos ones. But that I guess I can get going once I am connecting the AVP.

Thanks, good idea. That worked conceptionally. Will try in my setup next week.

That‘s what I did. Still - if I save these settings, close the speaker setup and reopen it - everthing‘s back to 2.0 playback format.

I definitely get sound from all speakers during the speaker check and sweeps for all channels I wanted. So I think I got the routing right. See the measurement screenshot. But under speaker setup in the „playback format and routing“ tab it looks like I cannot go to anything else then a 2.0...

Hi all, after being very happy with various Stereo Setups in Audiolense (2.4 and 2.2) I am now trying to use AL for my Home Theater. The final plan is to get Dolby Atmos/DTS/Auro 3D sound with an AL correction, which means routing the outputs of an AV Processor to an interface. For starters, I...

Great!

Great, thanks. I had the same problem in an active 2-way 3 driver sub setup. Thought that the LFE frequency was only relevant for 5.1, but obviously not. Solved!

Joining! Can you do something about the copy & paste limitations on the new forum? It‘s odd that as a former googlegroups uswe you cannot upload screenshots and such here only until you have 10 posts...

Got it.Thanks!

Very impressive! I am about to integrate 5 subs, currently I have 4 and run them as cascaded stereo subs in AL. I was initially planning to integrate the 5th sub as a part of a 3 sub array <50Hz with MSO for the low end via a MiniDSP 2x4 HD and use my 2 Rythmik F8s as stereo midrage subs...

Great. 256 channels will work for me :-)