Recent content by Soj

Pics:

Hello again Dan! So i went with your advice and placed the larger early reflection traps on the sids instead of the short ones. I also purchased some corner bass traps and additional normal bass traps. I would appreciate it if you could please take a look and my rew siles pre traps, post traps...

Hello again Dan, was wondering if i could consult with you once again: So those boosts i have in: 92.5Hz , 117hz, 162.8Hz Are still bugging me a bit and so i used a tone generator for these specific frequencies + my rooms fundamental mod (49hz), i also used white noise and walked around the room...

1st of all the song is great i love the "just like rain" line and "because i love...you" and the melody and instruments opening up there :) The vocals sounds very clear and full, The piano sounds amazing man, wow, did you mic it with 67 as well, what kind of a piano? Is this your material? hmm...

I never tried the 67, I have rented a 47 couple of times and was very pleased with it. The fact you have them both is amazing, I would love to hear some of the stuff you make in your studio. What kind of monitors, conversion do you use? Haven’t tried the mirror trick in a while I’ll try it...

The LA2A is real but it’s the new version not the vintage one. The mic I’m using is a u87 from 1974. The plastic bag is from an article that I read regarding dust and sugar on out breaths mixing and sticking to the membrane. Let me see if I got what you wrote straight I should remove the shorter...

Thanks for taking the time and helping me :)

Btw, I found your thread over at the Gearslutz acoustic forum and I have a question regarding what you wrote about the rt60. So, from what I understood I should ignore and uncheck all values except the T30 and topt? I’m asking this because with my measurements the t20 and specially the edt were...

Hello Again DanDan, I did some more testing with these deferences: *Monitors are as close to the front wall as i could. *Measured 2 times per file (instead of one). *I was not present in the room during the test. *Measured L and R separately. I would appreciate it if could tell me how do i look...

Hello again, in regards to standing next/behind to the mic while measuring : sure i could put on a timer on rew and leave the room while testing but i thought that my body is in the room while mixing so staying while measuring kinda makes sense because ill generate these freq nevertheless. Ill...

So i moved the speakesas close to the wall as possible and it gave a pretty nice result, tho rt60 still looks insane. I still don't understand why...

Will do, Btw although I am sitting at the 38% point of the room but I am not sitting in an equilateral triangle: distance from one Monitor to another is around 1.40m and the distance of both monitors for me are 1.10cm so I am sitting in bilateral triangle.

Here are some pics and a sketch of the room: Btw with this measurement the monitors tweeters are around 40 cm from the wall.

Hi Dan Dan I am using amphion one 18 on top of iso acoustics 155 on top of heavy 70 pound stands. The monitors are powered by the amphion 500 power amp. I have made the measurements using presonus prm 1 mic connected to my apogee element 24, the mic was on a stand and in the 38% of the room. My...

Hello John, thanks for replying. Any thoughts on why that’s happening? A solution? i added a small drawing of my room. Thanks.