-
-
RRolledmyown replied to the thread PASSIVE TO ACTIVE.Thank you all very much for your assistance (including contributions to a long thread in ASR by you, Keith_W). I really made good...
-
RRolledmyown replied to the thread PASSIVE TO ACTIVE.I thought I did, but I'll check! Good point too.
-
RRolledmyown replied to the thread PASSIVE TO ACTIVE.Ah, OK, 100 - 22k should be fine. I have a big cap hardwired to protect the cap, but it is arranged to roll off at about 30 - 40 Hz, so...
-
RRolledmyown replied to the thread PASSIVE TO ACTIVE.OK, I've tried a couple of experiments and attached some of the results. First, I placed my mike at the listening position then used L+R...
-
RRolledmyown replied to the thread PASSIVE TO ACTIVE.Thanks for that Keith! The parallax error did occur to me, and that is why I started to go down in delay as I expected that the path...
-
RRolledmyown replied to the thread PASSIVE TO ACTIVE.Sorry, I should also have asked - should I deactivate the digital crossovers on each driver? For the sub I think the only thing I can do...
-
RRolledmyown replied to the thread PASSIVE TO ACTIVE.Thanks SM52, I did my close field measurements following the miniDSP recommendations using one speaker as the reference and in the test...
-
RHi folks, I'm a bit out of my depth here with some recent REW experiments - and audio in general! Long story short, I've have a pair of...
-
-
-
Loading…
-
Loading…
