Recent content by oneartist

After many streaming attempts I've settled on Tidal Connect using my iPad directly to Lyngdorf MP60 2.1. I also turn on the entire system with "hey Google turn on Family Room". This works using four smart duplex receptacles. If I want all 7 Magnepan speakers and four subs going at once I choose...

It seems like this process would require three imputs and minidsp only has two. Would it be possible to Y connect the two stereo channels to make this work? I've already combined my four subs using one LFE out from Lyngdorf MP60 2.1. I would like to try to make my front two Rythmik F12 sealed...

The Lyngdorf MP60 2.1 is an AV processor that has 16 XLR outs. Output 6 is dedicated to LFE. Using REW and FLEX to combine sweeps of four corner subs into one virtual sub. Originally I was planning to replace the GR Open Baffle subs with the F12SE Rythmik subs but I decided to make the F12 subs...

Thanks tjc, I'm only going to use two FLEX units. I will sum four corner subs for the one LFE output of my Lyngdorf MP60 2.1. And the other FLEX for a pair of Front L&R subs. The MP 60 sees the L&R subs as output 13&14 (Aux outputs). There is a lot to learn in this process and I appreciate your...

I was told that REW doesn't care which miniDSP outputs it is sweeping. You can sum the output of one DSP sub pair with the output of another. If this is true, my problem is solved. I'll use all three units.

I am planning to use three miniDSP units for six subs, two inputs from FLEX to one pair, two from another FLEX to a second pair and two inputs from a 2X4HD to the final pair. There are four subs in the front, two stacked. I think it may be better to just use one FLEX unit to four LFE subs so I...

Thank you. The tutorial I was following made one virtual sub out of all four corners of his room. But he was doing it all from one 2X4 HD. I have two balanced FLEX and one 2X4 HD. I see that miniDSP has produced a new software called Device Console that combines FLEX and 2X4 HD. I'll check it...

I am understanding time alignment and summing measurements of subs of one miniDSP unit using REW. But I have three units, two balanced FLEX and one 2X4 HD. One FLEX has two LFE subs, the other FLEX has L&R rear subs and the 2X4 HD has L&R Front subs. How do you sum the miniDSP units? Any help...

Thank you. I was impressed that AVNirvana asked for a complete listing of my componants. Never had that happen before.

I'm 76 so Old fits. I bought a high end AV processor (Lyngdorf MP60 2.1) because of the reviews of their "RoomPerfect" processing. I'm here at REW because I read that pre-sub processing using REW and miniDSP before running RoomPerfect has many benefits. I'm looking forward to interacting with...