Recent content by needhelp

Actually John, on further testing with using the full range EV's as subs. I realize if i keep the bass volume level high but at a certain level and not overdriven there is only one area in the room like 8' away from the speaker where I hear a vibration type nolse but nothing is actually...

Hi John, as an update to this situation I am hoping you might be able to advise on this new development please? Few days ago I turned on my equipment as normal and no sound from my passive EAW SB1000Sub. So to test, I pulled out the speakers and removed the cable and plugged into my EV...

Sounds like a great idea thanks. I guess I can try sometime that with my surround 10" powered sub.

About the only thing I forgot to mention which I had thought of was to put an omnidirectional sun right smack in the middle of the empty space, this what no matter where you walk or sit around it one should hear around the same bass but even that I am not sure of.

I have thought about that many times [thanks]. Issue with that is I cannot have the subs in the walkway. I had then thought about instead of going with a DJ system to try a surround type system but I think won't make sense since I cannot physically have the subs just anywhere I would like in the...

Ok thanks, that's a very good explanation and yes you are correct in that the bass "sounds lower" in different spots. Since I can't place the speakers anywhere else and can't do anything about the room then no way this can work right?

Sorry for the late response. I have been having trouble getting APO to work on my win7 music machine and after trying everything today I am going to try upgrading it to win10 to see if that will help. Meantime I would like to get some clarity on the different bass at different spots issue...

Well, if I am following this accurately so far, I am thinking the purpose of the APO is for it to be used instead of any external hardware to correct the problem frequencies? If not then what's the purpose for the APO please?

Hey John, so I was advised to choose the PC's sound card's "Speakers" option on the Equalizer APO forum. Now reading through the "Getting started with REW" documentation it is showing I will need a MIC so I am guessing this is for an RTA setup but please clarify?

Hey guys I have installed REW and trying to install and setup the EqualizerAPO but please see attached screenshot below and if anyone can advise on exactly which options to check would be great. The Line 1 Breakaway Pipeline is a Compressor software I run my mp3 software through it. Those 4...

Oh, I am installing both softwares now meantime, can I ask for help here in this thread or should I create a new thread or post in a different sub forum please?

My bass is set at 80hz on the Rane xover so that shouldn't be a problem Ok, thank you very much for all of the help and info. I should be able to get to my rig tomorrow and will try and report back!

tHAT I can at least try with a demo of REW and I have a spare DBX EQ which works on one channel or might be better to test with the EqualizerAPO. Tell me this please, if testing with REW and APO, would I be able to do this only on the sub as whatever I might use I don't want it to interfere with...

Yes, I got that part but issue is when we adjust the eq or xover to correct the problem while one tune it playing, another tune will require having to adjust again and so on and so on. We haven't been able to find any one setting with which all tunes will play without the issues and we have been...

That being the case then this might be a moot point. Reason being, I cannot do anything about the speaker location as it's in the only spot in the Garage which is in the middle of the back wall. Also there are times when some tunes vibrate the ceiling alone and not any of the speakers so I...