Recent content by Luca_audio

I will ask ROON, I found the issue is only with 44.11 16bit MQA 44.1, with 24 bit no issue. If I set MQA "work" in roon no problem, otherwise in DAC, issue Regarding DAC, I try that!! thanks a lot

I’m using roonand I provide it a zip file with filter for 44.1, 48, 88.8, 96, 192

Any idea about that?

When I check levels no, when I start measurement yes (from R) but it seems that MIC doesn´t hear it cause the measurement stop, waiting for timing signal

I got some result in this way: I did measurement for R ch. and then I switched R with L line output from the dac in order to let REW think that I was using always R ch. The issue is that I did it with "no reference timing". Now the convolution filter with inversion that I created seems to work...

Hi all, below my settings. 1 and 2 pics the only parameters I changed after deleted all the settings 3 pic my measurements details. John, if I use secondary output both channel works. Right channel alone works but left channel alone doesn t work when I try check levels

Thanks John, I will try that. But how could I solve that if it’s this the case? Other info I can give you is that if I use the refer sound in order to check distance btw speaker and LP, the measurement blocks at 1% as the mic doesn’t get the impulse

I selected both, I mean, L for left channel measure and R for right channel, keeping R channel for reference for both the measurements. I will sendyou ASAP pics

Dead all, I’m new here, thanks for accepting me! I after years I came back to REW for basic measurments. I did it already some of them. I bought a new Dac gold note ds-10 andI’m trying to get a measurement butI got issue: when I check levels, and when ai start the measure I get sound only by...