Recent content by Keladrin

OK I have managed to install REW on my old desktop, wired everything up and no problem at all with bass levels. Headphone output used here as well. So beware of Dell laptops. Done some great measurement curves.

Update. The Dell engineer came and replaced the motherboard and updated the BIOS. We also looked at all the software settings including AudioPro (above). In short nothing worked. The latter would boost the bass a bit but, if disabled, bass cuts off completely at 60Hz. Even with it turned fully...

OK but there does not appear to be this option. There is nothing to click or disable.

Did some online research and it appears its a common issue with laptops. The driver mutes the bass output to prevent the internal speakers being overloaded. The trouble is there does not appear to be any way of turning this off. Tried updating the audio driver and it actually seemed to work for...

Tried an SPL meter just to confirm it was not mic related - DB about 40 down starting from 200Hz and lower. Even put the meter at the speaker port output, tuned to 30Hz and virtually nothing at 30Hz. I am hearing nothing as well. Definitely the Laptop/soundcard. Will have to borrow another one I...

Hi Guys. Yes I meant the connector type is phono. Tried various amplifier inputs. I think the problem might reside in the soundcard and it does not have any enhancements applied. Will have to try another laptop I think.

Connected to a Cambridge Audio A1 MK3 amp via headphone socket on laptop to phono in. I've tried 2 amps actually, same results.

Hi. I'm new to REW , using a Dell Latitude 7290 laptop running Windows 10 with Realtek Audio selected as the output (Java). but I am getting zero to now bass output below around 200Hz. Bass is around 40 db down in measurement curves, regardless of what I am measuring and proximity of USB mic...

Ah I think I've solved it. The mini USB lead was faulty and did not push all the way in at the mic end. Changed the lead and all looks OK now

When I first plugged the UMIK-1 mic to the Laptop it showed in the input list (and I got a message saying new input device connected from the laptop), but now it is not recognised. Tried unplugging/plugging/reloading REL. The light on the mic is coming on but nothing else showing it is...