-
-
Jjustbob replied to the thread Filter Generation Errors.So it seems this error has something to do with attempting to use a Mid-Band correction in the Correction Procedure Designer. Once I...
-
Jjustbob replied to the thread Filter Generation Errors.Hello Bernt, This error occurs not on start-up but after the program has been running fine for a few hours. It occurs at the time the...
-
-
JHello, Does anyone know the cause and fix for this obnoxious error message? It seems that once you get it the 1st time, there is no...
-
-
Jjustbob replied to the thread Audiolense XO Version 6.7 - Highpass XOver Results Aren't Viewable On Simulation.OK Bernt, thanks for the clarification on this
-
Jjustbob replied to the thread Audiolense XO Version 6.7 - Highpass XOver Results Aren't Viewable On Simulation.Hello Bernt, could you please be more specific on where you are seeing the bass offloading Freq being set to 250hz and where I should be...
-
Jjustbob posted the thread Audiolense XO Version 6.7 - Highpass XOver Results Aren't Viewable On Simulation in Audiolense User Forum.Hello, Maybe someone can explain what I might be doing wrong here. I have a 2.1 speaker setup with 2 main monitors and 1 Sub. I am...
-
-
Jjustbob replied to the thread REW Soundcard Calibration & Loopback Questions While Using Active Monitors w/AES Input.Hello John, I've been under the impression that someone should strive to use a timing reference (be it an acoustic one or lookback)...
-
Jjustbob replied to the thread REW Soundcard Calibration & Loopback Questions While Using Active Monitors w/AES Input.Hello, back again. I was playing around with creating a Loopback within the Hilo last night and it appeared to be working as expected...
-
-
Jjustbob replied to the thread REW Soundcard Calibration & Loopback Questions While Using Active Monitors w/AES Input.Thanks for the additional explanation and details
-
Jjustbob replied to the thread REW Soundcard Calibration & Loopback Questions While Using Active Monitors w/AES Input.OK, so let me ask this. Based on your response about setting up a Local Loopback within the Lynx (I assume you mean using the routing...
-
-
Jjustbob replied to the thread REW Soundcard Calibration & Loopback Questions While Using Active Monitors w/AES Input.OK I will be sure to keep this in mind when setting up the Lynx. I should have wrote these two questions in my last reply a bit...
-
Jjustbob reacted to John Mulcahy's post in the thread REW Soundcard Calibration & Loopback Questions While Using Active Monitors w/AES Input with
Like.
I'm referring to the Lynx interface mixer settings. -
Jjustbob replied to the thread REW Soundcard Calibration & Loopback Questions While Using Active Monitors w/AES Input.Hello Sir, thanks for the response. I will skip the sound card calibration process then. Good to hear. Can you clarify the quoted reply...
-
-
Jjustbob posted the thread REW Soundcard Calibration & Loopback Questions While Using Active Monitors w/AES Input in Official REW (Room EQ Wizard) Support Forum.Hello, So I'm trying to wrap my head around how to best configure REW while using a pair of active Genelec monitors in combination with...
-
-
-
Loading…
-
Loading…
