Recent content by Ccumato

With Audyssey at 400-800hz and below it actually lowers all the frequency above 800hz so its 2-3db less If I do fully Audyssey it keeps it at the same level as no Audyssey at all. so partial Audyssey affects the highs loudness. Same peaks and dips but at lower volume for some reason. I would...

I had it running full range Audyssey. but lowered it to 800hz. Reloaded the file and cross over at 150hz and moved the svs sub from -10 to -7 on the SVS App. Personally that sounds terrible but I am now gonna upload the measurement. Red is 200hz crossover 400hz Audyssey and below -10db Sub...

Thank you John. I cannot really move the soundbar, but i did move the subwoofer to the left side of the stand. That is more center of the room than in the corner. Also I did apply Audyssey. But what is weird if I limit audyssey to 500hz and below it lowers my signal from 500hz to 20,000hz by...

bump

Here is the files. If I did something wrong please let me know. I moved the Left channel speaker wires to each speaker. Left then Center and then Right. I labeled them LCR. went from 20hz to 22,000 hz. Running 3.1 system with pc2000 sub - No Audyssey No Eq 120hz cross over. Thank you in...

ok I’ll google how to do that.On my window it just had right and left.

Do I need to test the left Separately, then write separately, then center. running 3.1

I setup REW and mini dsp mic. I did some measuring but I’m not sure how to read the data. I’m watching all the videos but I’m trying to figure out why my speakers sound terrible. Can we see that on REW?

I currently have a Denon 3500 and Goldenear XL sound bar with a PC2000 sub. With 0 Audyssey, no eq it sounds terrible like a $50 speaker. If I turn Audyssey on flat and Audyssey EQ on it sounds 50% better. Where do I start to try to track down the issue. Do I use REW and run test. I have...