Recent content by carsknivesbeer

I only unplugged the aux cable from one output to another. It must be some kind of processing. Is there a wav file i can play through a different source to compare or can I make one via audio check.net? Edit: Nevermind I figured out how to create a wav. Thank you so much for your time John!

The initial reason I posted this was 10db dip from 400 to 800 in my first graph of Two Rooms. Those two measurements were of 2 entirely different setups, measured on my laptop. I found it odd that JBL530 in a large room and LS50s in a very small room had the same huge valley in the mids. The...

Here are the attached files. The microphone and its placement, calibration file, speakers, and amplifier are all the same for both files. The September 30th file Red line is using the laptop with the test frequency coming from the laptop. The Purple line is with the test frequency coming from...

Thank you for your response! Sorry it is a little confusing with 2 different computers and two different rooms/speaker sets. The second graph (LS50) was only included to show that the Umik1 functions as it should, not as a comparison, when I plug it into my desktop. That eliminated the Umik1...

I am running REW using a calibrated Umik1 on two different computers. The first is a Mac desktop and the recorded sweeps are correct. When the same Umik1 is attached to the laptop, the graph always look the same. That is two entirely different rooms/speakers/amps. The mic is recording the...