Recent content by busdriver13

Here is my best attempt at being an artist!! I moved the speakers a bit and managed to get better measurements. Don't understand why the roll off at the high frequencies except that I was running the test generator via airplay to a Bluesound node2I. Room is 22 feet long. The drawing appears to...

Yea now that I read it, it wasn't very clear. So the front of the speakers are 43 inches from the front wall, the sides of the speakers facing the side walls are 30 inches away and the speakers are 8 feet 4 inches apart. I sit 9 feet from the speakers, the back wall is 7 feet behind me.. The...

Thanks!! Been playing with things but it's a pain moving these things around. I moved the speakers 6 inches back from the original position. That puts the face of the driver 43 inches from the back wall and side of the speakers 30 inches from the side walls. I also moved the rear soffit traps to...

Hahaha. Too funny. Thanks for the help!!

Anybody??

Alright, I think I fixed it thanks to you guys. Here are the new measurements.

Thanks fellas. As soon as I can make some noise ill make those changes and post the new measurements.

I have REW set to start from 10hz-20000 hz for the sweep. So you're thinking it's a processor setting or in the REW settings? When playing music, the subs are working. :dontknow:

Not that i'm aware of. The subs are crossed at 100HZ. All other settings are normal or off. No tone controls or anything. Where could I find if there was a high pass anywhere in the chain?

Hi all. I'm just getting my system situated and took my first measurements. The room is 22L x 18W x 8H. I have acoustic treatments form GIK acoustics. Each corner is treated with soffit traps, I have (2) 244 bass traps behind the listening position on the back wall, and (2) 244 on the front wall...