Recent content by Arsis

Do you have any suggestions for the frequencies below 60? I've mixed in worse rooms than this and as long as I am aware that there's a hump at 240, I can deal with that easier than the lower frequencies. So my first concern is putting a harness on the low end.

Thanks for the tips! Let me reframe the situation a little bit. This room is being built for me by my wife. I'm in a wheelchair. So I'm wanting to keep it easy and simple. We had most all of the foam from a previous build. The room is certainly over dampened at this point. Right now I don't...

I will be adding some more broad band bass traps ( foam corner variety ) to tame those modes. I will eventually be replacing some of the 12x12 foam tiles with diffusion to get my RT60 up. What inexpensive method have you guys employed to tidy that low, low mud sludge? BTW, the back corners are...

Hi gang, I'm new here and new to REW. I'm setting up a small room for music mixing and thought I would share my quest and get some advice. Here's my scenario. 12'6" x 11' with a 9' ceiling. The room is completely empty of furniture. The front corners have LenrD bass traps from floor almost to...

Hi gang, I'm new here and new to REW. I'm setting up a small room for music mixing and thought I would share my quest and get some advice. Here's my scenario. 12'6" x 11' with a 9' ceiling. The room is completely empty of furniture. The front corners have LenrD bass traps from floor almost to...

I did rock and metal bands for years. I'm working on more of a pop rock project right now.

I've been a studio engineer for 24 years. I'm currently setting up a room for mixing. 12"6' x 11' with a 9' ceiling. Mackie HR824 and 2 Polk Audio PSW10 (subs aren't really for mixing, just for fun). I've worked in world-class recording studios as well as many less than ideal rooms. My Mackies...