Wayne A. Pflughaupt's latest activity
-
Wayne A. Pflughaupt replied to the thread SPL Range and SQ help.First, welcome to the Forum! We typically recommend graphs with a 60 dB range on the left axis; yours shows only 35 (-15 to -50)... -
Re: SPL range. Most likely your microphone does not have SPL calibration + you skipped the SPL calibration step in REW. If you want your...
-
Wayne A. Pflughaupt reacted to John Mulcahy's post in the thread Audio Amplifier / Sound Card Calibration Files with
Like.
This is the solution if the effect of the amp's bandwidth limits is significant. -
Hi everyone, I’m here from Dirac. We’re always looking to improve our products and better understand the needs of audio enthusiasts...
-
Wayne A. Pflughaupt reacted to JStewart's post in the thread Using the EQ function: proper approach for flattening mains? with Like.
I shouldn’t matter from a sound quality perspective. More important is not using EQ to extend a speaker’s range beyond its limits (which...
-
Wayne A. Pflughaupt reacted to ddude003's post in the thread Using the EQ function: proper approach for flattening mains? with Like.
That would depend on your use case... If mostly stereo music I would suggest crossing over at about 10Hz above where main speakers roll...
-
Wayne A. Pflughaupt reacted to John Mulcahy's post in the thread Feature wish: multiple units simultaneously on Level Meter + make Calibration window non-modal with Like.
Clutter would be the main issue, since unit choices are V, W, dBV, dBW, dBu, SPL and dBFS. Note that the SPL meter uses an FFT to...
-
Wayne A. Pflughaupt reacted to John Mulcahy's post in the thread REW setup HELP on Mac, Audiobox USB, Calibration with Like.
Make sure REW has permission to access audio inputs.
-
Wayne A. Pflughaupt reacted to rpschultz13's post in the thread REW setup HELP on Mac, Audiobox USB, Calibration with Like.
ARG! That was it! Thanks so much!
-
Wayne A. Pflughaupt reacted to John Mulcahy's post in the thread Can't calibrate Universal Audio apollo sound card with Like.
That's usually an indication of the input being mixed back to the output, you should be able to fix that in the UAD console, probably...