Recent content by SSC

Hi Steve, Thanks for the heads up on Acoustics Insider. I have actually been watching a few of his videos this past week or so. Some really cool info, and on his site too. I have now got my speakers postioned a little better for me and my room. It's surprising how even a few inches can make...

Thanks for checking! I can hear a litlle more lowend now. I will just keep experimenting with placement and postion and try working out how to read the measurements now. Seems to make more difference than anything else! Most of my panels are kind of too thin really, plus the room is really...

Hi John, Thanks for getting back again and cheers for the RTA test tip! I used it today. I have had another shot. Probs be the last for a while as everyone is getting annoyed with my clutter everywhere for 3 days! I found out I was setting pretty much dead centre between the floor and...

Now I finally know why my left side always sounds shifted in the centre, stereo image! Bass and drum, mono shoots to the left.

Hi, Thanks for getting back on that. I'v been testing and re arrange all day again. If you have a spare 5, are these results any better? The lowend seems more present. I can actually here 80hz bass drums! Trouble is it's a lot further away from my screen. Don't think my neck and eyes can...

I'll have to try a test without the jazz size drumkit in the room too!

Ah, and tomorrow I will use 1 sweep at 256k. My setup is all syned up to 96kHz. Is 96kHz still fine to use? Thanks again!

Thanks for taking the time to take a look! Glad I got usable measurements. Really? I'm pleased to hear it's not a complete disaster then! My room is tiny it's 7ft 9" height, 13ft.8" length and the front wall where my speakers are is 8ft.5" wide. It's a frankenstien of a room! No wall is the...

Just attached. If anyone could check to see if I done the sweeps right, that would be great! My room ain't looking cool, lol, if I'm reading right. Cheers!

Right, so I have had a shot at it again, aimed for 50-55dbfs. Seemed much better! Is there a way I can upload the .mdat file on here, just too double check If I done this right?

Cool! Man, I spent all day trying to figure out what was going on. I will have another shot now! Cheers for the help!

Hi, Thanks for taking the time getting back! Sorry, I am now way a tech head. more wired on the creative side! When the white noise is playing at 75db in my room, what level do I aim for on the input, -50 dBFS? Thanks.

My REW settings are- Drivers- ASIO Sample Rate- 96 kHz ASIO Device- ASIO Hammerfall DSP Output- 1. AIO Analog 1 (Channel 1 on RME output. This goes out to my monitor controller L into my left speaker.) Input- 1. AIO Analog 1 (channel 1 on RME input. The Behringer ECM8000 is connected to...

Just to point out incase your wondering, the RME AIO Pro is a pcie card type. No built in preamps, so need to use my ISA 428.

Hi, After years of holding off measuring my small home recording and mixing setup, I thought I would give it a go today. I am borrowing a Behringer ECM8000 off a mate. I have managed to calibrate my soundcard which is a RME AIO Pro, also the output in REW seems fine I can get a nice 75dB on my...