Recent content by SimpleDude

Thanks for the response, it’s definitely a drop in the response, it did the same thing at different frequencies on different atmos speakers. I think at this point in the future I will resort to using a laptop with a specific/older Windows 22H2 with HDMI direct from laptop to AVR and REW 5.20.13...

Hi All, Have applied room treatments via acoustic panels and needed to do a new calibration with Dirac Live and post cal checks/corrections with REW, I had this issue last time (on 5.20.14) but never found a fix for it, running on Windows 10 connected via a DisplayPort > HDMI adapter going into...

No problem, I ended up using the 90 degree file as that’s what Dirac Live used, applied frequency response curve corrections and it sounds quite good and balanced. I changed the AVR MV to -18 and kept the REW sweeps at -12.

Thanks, did you have any recommendations about using the 0° or the 90° file for the UMIK1 for Atmos channnel measurements?

Thanks for these, had a question regarding volume setting on the AVR when running these, I have a Denon X3800H, normally I set the AVR to 0MV and use -30dBFS sweeps in REW, would I need to change these for playing back the latest 256k sweeps for the atmos channels ? Also the microphone file to...