Recent content by scintilla

Yes, because the HTP-1 does not support DSD internally even though the AK4493 DAC supports it, the input receiver circuitry does not. If you read above again you will note that I am remodulating to 192kHz/20-bit PCM for the Dirac off/bypass modes and to 48kHz/24-bit for the DLBC-on modes. Many...

Keep in mind that the sweeps were done through the HTP-1 with DLBC on and applying a correction filter. So, the sweeps reflect the bass steering. Those sweeps were then used to create AL filters with TTD. I did not use REW for before and after verification, because the AL predicted curves are...

Just a little followup on my testing: Here are the sets I measured and built filter sets for: 1. Dirac off, 5.1 channel, front sub only with rear sub disabled. The purest. 2. Dirac bypass using distances from a Dirac measurement and stock bass management for 2 subs, front and rear. The...

Hi, I recently added XO to my stable of DSP tool to enable a multichannel correction in HQPlayer for my 5.1 channel ripped music files through a Monoprice Monolith HTP-1. Since that unit does not allow direcly addressing multiple subwoofer channel inputs and I will be using two discrete subs...