Recent content by rodelius

The only reason to buy another sound card was to use it to measure at 48kHz, because the Fast Track Pro only works at 44.1kHz with Mojave. And while 44.1 is enough for most things (including impedance measurements), for the very occasional measurements that I have to do with DIRAC when I change...

I have read that report, but given that I will be using the soundcard only for measurements, eq and REW, I thought I would be fine. I did not anticipate the software problems though. But if I return it I still need another card. Any suggestions?

Got a good deal and purchased a Behringer UMC204HD interface to replace my old M Audio Fast Track Pro. Main use was and will be occasional measurements with REW. Despite the UMC204HD not needing drivers for mac, I have found it impossible to make it work well with REW on any of my Macs, all of...

Dear John, thank you very much for taking the time to check out this particular problem. Indeed, the input and the output were at two different frequencies. Unfortunately in Mojave it is no longer possible to select 48kHz for input and output, so I had to use 44.1. For what I need, it seems to...

Hi John, thanks for replying. Apparently, the soundcard is working fine (see jpg). I deleted the previous calibration and made a few normal measurements using the same (left) output and the left and right inputs. Then I also swapped the channels (cable and REQ soundcard prefs) and tried to do a...

Thanks for replying. Also thought that might be the cause at first, but I went through everything and also built two different jigs... My soundcard is rather old, yes, but it seems to be working fine in FuzzMeasure, albeit with limited sample rate and bit depth. What puzzles me is the fact that...

Hi all, Although I have used REW on several occasions, I have never tried to measure impedance. Yesterday I got down to it and built not one, but two jigs to be able to do the measurements. After calibrating the levels and performing the calibration, I started to measure, but I see that putting...