Recent content by pimogo

  1. P

    What improvements can i make to my process? 2 channel audio w/ UMIK-1

    Actually just looked at the back of the Fortes. The bottom of absorber meets the bottom of the radiator so the radiator port is completely covered by the absorber.
  2. P

    What improvements can i make to my process? 2 channel audio w/ UMIK-1

    Thats a fair point and was unsure about that myself. Let me follow up w/ GIK to see what they say. I'll rerun my sweeps in that configuration. SHould be a useful data point regardless. Thanks for suggesting it!
  3. P

    What improvements can i make to my process? 2 channel audio w/ UMIK-1

    Hi. Thanks for asking! I held the microphone parallel to the floor with the head (or grill part) facing the right wall. l then moved the mic in medium sized circles (about a foot in diameter) in and around the listening area for about 30 seconds or until the graph was no longer moving. The...
  4. P

    What improvements can i make to my process? 2 channel audio w/ UMIK-1

    Thank you! I've read both resources and have a better understanding of room modes and the sound imparted by a given room. How to correct that is still a bit fuzzy and at times overwhelming and discouraging. I'm looking into the idea of adding a sub. I have a spare one from a leftover project...
  5. P

    What improvements can i make to my process? 2 channel audio w/ UMIK-1

    SUPER HELPFUL! Didn't understand all of it, but ordering that book. If i can lean on you one more time, i have a couple follow up questions i was unclear about after reading (and rereading) your post: Not familiar w/ the concept so my question will likely be nonsensical, but how were you...
  6. P

    What improvements can i make to my process? 2 channel audio w/ UMIK-1

    Hello All ! New to the community and looking for help to fine tune the process below which I've undertaken after a bit of research both in the forums and on YouTube. I plugged settings I've seen others use but I'm not entirely certain if these settings are best for my specific case. I should...
Top Bottom