-
-
PPhil Pope replied to the thread Umik-1 and J-BoxII giving different curve above 4kHz.I changed the internal gain switch on my UMIK to do high volume measurements of subwoofers. amended the cal file to change the gain...
-
PPhil Pope replied to the thread Umik-1 and J-BoxII giving different curve above 4kHz.thanks. the J-Box measurements seem to keep the same shape regardless of drive level whereas the Umik roll-off seems to be all over the...
-
PPhil Pope replied to the thread Umik-1 and J-BoxII giving different curve above 4kHz.thanks for looking at this. So the UMik cal file is incorrect? How can you tell it is the Umik cal file rather than the JBox cal file?
-
PPhil Pope replied to the thread Umik-1 and J-BoxII giving different curve above 4kHz.here is mdat file
-
PPhil Pope replied to the thread Umik-1 and J-BoxII giving different curve above 4kHz.No
-
PPhil Pope replied to the thread Umik-1 and J-BoxII giving different curve above 4kHz.just tried it again at a lower drive level. less of a difference but still there.
-
-
PPhil Pope reacted to Wayne A. Pflughaupt's post in the thread Umik-1 and J-BoxII giving different curve above 4kHz with
Like.
For others checking this thread, the OP is not talking about the stand-alone karaoke system with the same name as the speaker... -
PPhil Pope posted the thread Umik-1 and J-BoxII giving different curve above 4kHz in Official REW (Room EQ Wizard) Support Forum.Hi not sure why I am getting different measurements. Umik-1 USB mic is set up with mic calibration file, headphone output goes to mixer...
-
-
-
Loading…
-
Loading…
