Recent content by peelbone

Here is a link to the dsp in my Funk subs: https://alldsp-oem.com/product/1800b-signature/ Input-to-output latency FIR disabled, unity gain 466 µs =)

Yes that was very inconsistent *=)

This was harder than i thought... I now got the right sub connected to left output on the preamp and the preamp right signal to the right mains speaker. Ive made alot of measurements and trying to set the frequencydiffrently and get all sorts of results everything from mains being 2 ms slow to...

This was very helpful Kevinzoe !!! My subs got total latency of 0.466 milliseconds wich means about 16 cm and i have them setup exatly 16 cm closer to my mains and have a delay of 0 set on the subs. Now its time to measure this =) TY TY TY

I dont think there is a multichannel dac thats up to par with my newly ordered Playback design mpd-6, there is always a compromise =)

Thanks alot =)

Okej! This is good info! My dac has several gain settings: -6db (1,7 vrms) -3db (2,4vrms) 0db(4,1vrms) +3db(4,8vrms) +6db(6,8vrms). My preamp has sensitivity 2.0 v so i guess -3db is best for it with out AL XO filters. So if Al XO filter makes my gain 7-8db lower + headroom in Roon -3db i can...

What is Audiolense convolver? i can still use roon?

Okej you are probaly right. the problem here is that i need to set headroom of atleast -3db in roon so the signal wont clipp during playback. At this point i have practicaly lowered the expected volume with -10db wich is a bit much for me. is there an option not to lower db and still get timealign?

Hi all! Here is a new question for the forum. ive made a filter based on the standard time allignment filter with only change to the max correction boost from 6db to 10 db. This is the result: Should i lower the output on my subs prior to the measurement? so i dont get -15 db output from the...

My subs are connected through y-cable between my pre and amp so i realy want to use a lpf on my subs. My subs play up to 200 hz.

Thanks for the reply!! I meant what filter typ for the lowpassfilter? Like Butterworth, Linkwitz riley kind of filters. My Funk subs have powerful dsp =).

Hi! I finaly got my two subs deliverd home to me. Here is a measurement picture of my system without the subs. My question is: What kind of lowpassfilter should i use on my subs and at what Hz? Thanks.

Thanks for the reply! i maybe need to reconsider my statement about dacs =) I had some conversation with Mitch and he is basicaly agreeing with you so thats that. I will start with a AL XO with my current setup and see how it goes. Thanks!!

say i just want to get better result without the subs for my 2 ch listening, is AL worth it? I got ROON for my dac