Recent content by paullambert100

Okay thanks for the clarification! I was freaking out a bit there. So would you suggest forgetting about measuring both speakers at the same time and just focus on individual measurements of L + R or is there some unseen benefit (maybe low end) that is useful when measuring both speakers at the...

Hi guys, thanks your assistance on this. I went back and tried again and what I think is a more balanced in getting the mic to center but when I even move slightly left or right (as in 0.5") I get a huge deviation in the nulls etc.. Does this mean that if even move my head slightly left or right...

Hi thank you for the reply. When you say adjust AVR speaker distance do you mean my monitors? I am using a universal audio x6 mic pre and not sure if this was pointed toward someone with a home theatre set up. I measured the distance of the speakers and put the mic in what I thought was exactly...

Hi everyone, I noticed something odd when doing measurements of my newly treated room. When I measure the speakers by themselves (L and R) and when I measure them both at the same time (L + R) a huge dip in the 6k-9k occurs in the stereo version of the measurement vs the individual L + R...

Thank you very much!

Thank you dandan and john. I agree and have read the manual but will go back and reread. It is a well written one. And john may I ask one more question? In regards to this modal peak? Is this a room issue (as in the right side of the room is resonating this way and causing this peak) or a...

Thanks! Would you also have any insight into why when I "test levels" and get an "Ok Level" check but end up going into 5db (red) when doing the actual measurement (this seems to only happen to the right speaker)? It seems to be trigged by the low end of the sweep. Thanks again!

Hi, I have retaken the measurements and used the niosh app at listening position to confirm that the output is 75-80db during "Check levels". The strange thing I'm finding is that after REW gives me the green "LEVEL OK" and when I start the measurement the head room is in red at 5db for the...

Thanks again!

cough.. I did spend 2 hours trying to figure out how to calibrate properly lol... Can you please help me with one more question. I watched the AV NIRVANA video "beginners Guide to room eq" and the presenter mentioned to measure at 80-85 decibels. I also sent my first measurement to GIK who said...

Hi all and thanks for your reply dandan! I ended up figured out the issue before I caught your response. I didn't have the output set to L duh! I do have another quick question. I have a cal file for my Sonarworks reference mic that I'm using with REW. I'm assuming that I am supposed to upload...

Hi John, I'm sorry to bug you again but I have tried to calibrate the file but am not getting the input level hot enough even with the input level maxed on console (uad). In REW preferences, I have selected the "output device" and "input device" as Universal Audio Thunderbolt. I have selected...

Thanks for your help!

Thanks john! And the cable needed to make the loop would be a regular instrument cable?

Hello, I have read the manual and have a question about the calibration process. I wondering if during the calibration process you need to keep your speakers plugged into the outputs? On my Apollo arrow I only have two outputs so I will loose one speaker since I am supposed to disconnect one of...