Recent content by Moses Magnum

Thanks for the help and input folks. I'll have a fiddle tomorrow, I was just a little confused as to why delay both left speaker and left sub. My limited understanding thought using the left speaker as timing ref for left sub would mean adjusting just the left sub. Well, every day is a...

Thanks, so I've got this right. Left speaker delay by 3.9ms and the delay left sub by 1.5ms? I could be completely wrong here, but shouldn't I only delay either the sub or the speaker? I have 2 subs currently running in stereo, not mono. Please feel free to virtually slap me if I'm typing...

HI, I'm hoping someone can take a look at this mdat file and let me know if I need to time align the subs. Thanks in advance

I've has another play around, would you mind looking at these and let me know what you think please?

Thank you! I think I know what I'm looking at now, I'll have another play around after work. If I'm understanding this correctly the aim is to get a flat a line as possible up to around 200hz? Would measuring the speaker on it's own so I can see exactly what the introduction of the sub does be...

Thank you for that, hopefully this next file looks better. Set sub at 80hz.

Hopefully this is more like it's supposed to look. Set at full range pink noise. Thank you for your time.

No idea if what I've uploaded is of any use... I set the high pass filter in the amp at 80hz, crossover setting on the sub at 80hz and took 3 readings from the left channel. Speaker, sub and combined. I don't understand what I'm supposed to be looking for at the crossover point on the readings...

Thank you. I have the settings for the Pink Noise as per the image in the help file, same for the RTA. My issue though is I have no idea as to what I should be gleaning from the data and what I should be aiming for...

Is there an idiots guide for this procedure?

Thanks John. I'll have a fiddle and see how I get on.

Hi, I'm trying to find an idiots guide that can walk me through measuring and correcting 2 subs for a 2.2 setup using the high level connection. If it's possible I'd like to use REW to help me dial my subs in manually using phase and crossover settings directly on the subs. Most guides I've...

I didn't listen to them without the optimization, I already had two that were optimized.

I'm using a MiniDSP 2XHD with REW with the subs in room corners. I tried MSO but found the tutorial problematic as it's not up to date. I've also only setup for a single seat at the moment. Once I have time I'll revisit MSO and try to set up for 4 seats.

Thanks! Handy info about the camera icon. Just need to see if I can iron out the 60-100hz bit now.