Hi DanDan,
What do you mean with Cloud?
I have added these 3 measurements for the same speaker placement as in the previous pictures. I do not understand these values, but I expect that they are important because of the name Clarity and reverbation time, but what are "normal" values? I expect...
hi all,
Thank you for helping. I did some measurements today and here is my current situation with pictures of my lsitening situation and frequency response (with 1/6 and no smoothing). The left speaker is 70cm from the front wall and 102cm from the side wall.
I am going to experiment and I am...
Hi M,
I use a 0-degree calibration file from UMIK-1 which is advised for stereo measurements. Are you saying that 90 degree is a better and that UMIK-1 should point at the ceiling?
best regards, Miro
Now, I measure response hoping to find the best sound. At the end the sound is what matters. And I thought that a good frequency response is a precondition for a good sound.
I am a guitar player with over 35 years of experience and I know how instruments should sound. Regarding my audio reproduction and equipment I can clearly hear the soundstage with all instruments between the speakers. But I still think that I miss clarity, the sound coming from my speakers is...
The problem in my LIVING room (as you can see in the picture) is that I have on one side a huge glass wall and on the other side is the open space with 10m deep. So I have reflections from the left side wall and no reflections from the right side. Further, I am also not able to place the...
Thank you, I am trying to understand. More than approximately 70 cm from the front wall is not possible in my living room so rather close to the wall if that will not ruin the tone. I don't want a boomy bass.
Can DSP also improve clarity and reverbation time or only frequency response?
What are RoTs?
So you are saying that it's better to have peaks and less dips/ cancellations? And moving the speakers to the front wall will increase bass which will create peaks in the response? OK, I understand, I will try to experiment.
Is it possible to optimize/lower these peaks with room...
Yes, I understand. I am trying to find the best sounstage. I have a problem with finding the best listening position. I just don't hear differences. I think there is less clarity due to too much reflected sound. I hoped to use REW to see the problem more easily.
The manual of the Paradigm Monitor says that the distance between the speakers should be 75% of the distance between the speakers and the listening position with a toe in behind the head. In my case it's 180cm between the speakers and 240cm to the listening position.
Yes, that is what I am looking for. So I need first to choose a listening and speaker position with least dips and than handle peaks with Dirac Live?
Is this a good approach? I have so many questions, but trying first to-down to understand how to start with room correction because this is a new...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.