John Mulcahy's latest activity
-
John Mulcahy replied to the thread REW Soundcard Calibration & Loopback Questions While Using Active Monitors w/AES Input.No, but you do not need a soundcard calibration. The internal routing loopback should work as the timing reference. It is something... -
John Mulcahy replied to the thread API phase differs from text export.I think the difference arises from the way the API is trying to handle a requested smoothing of None and 96 PPO. Try setting the API...
-
John Mulcahy replied to the thread API phase differs from text export.If you email the mdat file to feedback@roomeqwizard.com along with a screenshot of your text export settings I'll take a look.
-
John Mulcahy replied to the thread REW Soundcard Calibration & Loopback Questions While Using Active Monitors w/AES Input.If that's an internal loopback it is just sending back the same data it receives, so it should be completely flat. No need for a cal...
-
John Mulcahy replied to the thread REW Beta Release REW API beta releases.Unintended side effect of trying to keep the offset t=0 dialog updated, fixed for the next build.
-
John Mulcahy replied to the thread REW Beta Release REW API beta releases.Thanks, fixed for the next build. Occurs when trying to generate a warning that the timing reference level is low.
-
John Mulcahy replied to the thread Separate/different simultaneous output signals for L and R..Shouldn't be, but you'll need to set up the same dual tone signal in the REW generator so REW knows what to analyse if you want REW to...
-
John Mulcahy replied to the thread Separate/different simultaneous output signals for L and R..No, REW can't be configured to do that. Easiest might be to save each tone to a mono WAV file and use an external utility to merge them...
-
John Mulcahy replied to the thread REW Soundcard Calibration & Loopback Questions While Using Active Monitors w/AES Input.If you need a loopback as a timing reference you could make one locally on the Lynx. The loopback settings don't matter unless you...
-
John Mulcahy replied to the thread how does harmonic distortion add in generator work. does it add a sine wave with level and phase or jitter sine wave ?.When you sum harmonics you create a signal with a different amplitude envelope, your test is for audibility of distortion, not phase.
-
John Mulcahy replied to the thread how does harmonic distortion add in generator work. does it add a sine wave with level and phase or jitter sine wave ?.It adds the harmonics at the selected levels and with the selected relative phase. Your test is not a valid way to examine the...
-
John Mulcahy replied to the thread REW Soundcard Calibration & Loopback Questions While Using Active Monitors w/AES Input.I'm referring to the Lynx interface mixer settings.
-
John Mulcahy replied to the thread REW Soundcard Calibration & Loopback Questions While Using Active Monitors w/AES Input.Do make sure the input from the mic isn't mixed back to the output though.
-
John Mulcahy replied to the thread REW Soundcard Calibration & Loopback Questions While Using Active Monitors w/AES Input.You'll be fine without a soundcard cal, the monitor roll-offs will be much narrower than any contribution from the mic pre and the Lynx...
-
John Mulcahy replied to the thread REW Beta Release REW API beta releases.Builds updated today (beta 131) with these changes: Changed: Updated Windows and Linux bundled runtime to Java 17, linux without JRE...