John Mulcahy's latest activity
-
John Mulcahy replied to the thread REW Beta Release REW API beta releases.Yes, posting to the measure endpoint needs a Pro upgrade. -
John Mulcahy replied to the thread REW Beta Release REW API beta releases.It's because that's an older version of OCA's code, which is no longer up to date with the API. The AcoustiX version is current.
-
John Mulcahy replied to the thread REW Beta Release REW API beta releases.Builds updated today (beta 120) with these changes: Added: API spl-meter commands to open and close the SPL meters Added: API spl-meter...
-
John Mulcahy replied to the thread Distortion Measurements - "normalization" no longer working..?.Probably because you have selected the option to use the harmonic frequency as the reference and the response rolls off above 100 Hz, so...
-
John Mulcahy replied to the thread UMik-2 cal file - not a recognised USB mic.No, because ASIO is structured as a single device protocol. Wrappers like FlexASIO create a pseudo ASIO device that under the hood is...
-
John Mulcahy replied to the thread UMik-2 cal file - not a recognised USB mic.The UMIK has not been selected as the input, as far as REW can see. That might be because the input device and input have been left as...
-
John Mulcahy reacted to audiomacgyver's post in the thread Adding Pass / Fail vs Limit Capability to REW with
Like.
Hey There, I super love REW and have wished I could add basic Pass / Fail capability to help guide lab measurements and or to explore... -
John Mulcahy replied to the thread SPL Logger: How to ignore/reset initialization spike? (LAFMax & LZpeak getting stuck).Open the SPL meter first, use Reset all once everything has settled then start the SPL logger.
-
John Mulcahy replied to the thread Can i run 2 SPL meters?.Pretty much. There's an spl-meter endpoint to control the 4 SPL meters and I'll add an spl-logger endpoint for the logger. I'll include...
-
John Mulcahy replied to the thread Can i run 2 SPL meters?.Calibration offsets are stored per device and, if "Separate cal for each input" is selected, per input channel on the device. The...
-
John Mulcahy replied to the thread Can i run 2 SPL meters?.I'm afraid not. Calibration is interactive, so isn't a good candidate to trigger via the API. I can add API spl-meter commands to open...
-
John Mulcahy replied to the thread REW Beta Release REW API beta releases.There is now an example of using the API to evaluate QC pass/fail measurements at https://github.com/audiomacgyver/rew-iqc
-
John Mulcahy replied to the thread REW Beta Release REW API beta releases.That's a graphics driver issue. Run the installer again and deselect the option to use hardware graphics acceleration.
-
John Mulcahy replied to the thread IMD Measurements: "Generator" vs "Input" Level Discrepancy.It would seem that would only be an issue if distortion levels at the start of the test are higher than those at the end of the test, so...
-
John Mulcahy replied to the thread Can i run 2 SPL meters?.The logger only works on the first input. There are SPL meters for the first 4 inputs in the Tools menu. If you don't want the Pro...