John Mulcahy's latest activity
-
John Mulcahy replied to the thread Distortion showing in measurements.That's usually USB clock pickup. -
John Mulcahy replied to the thread Static noise, failed calibration using REW with Behringer UMC202HD Audio Interface.Set your ASIO buffer to its maximum value.
-
John Mulcahy replied to the thread Static noise, failed calibration using REW with Behringer UMC202HD Audio Interface.Perhaps you are experiencing the Windows 11 USB audio bug, there is a fix available.
-
John Mulcahy replied to the thread Export filters inpulse response as WAV.Filters belong to measurements. Load the filters into a measurement and choose that measurement for filter response export.
-
John Mulcahy replied to the thread Problem with high (jumping) input level when Calibrating sound card with Focusrite Scarlett 18i8.In the Focusrite Control app. The output must come only from the PC (typically labelled DAW), inputs must not be mixed to the outputs.
-
John Mulcahy replied to the thread clicks and clock adjustment too large.Odd, drivers should run at much higher priority. I'll let miniDSP know.
-
John Mulcahy replied to the thread Displaying measurements.Looks like the sub is active in the calibrated measurements. You could disconnect it.
-
John Mulcahy replied to the thread Monte-Carlo for REW.That's not something I have in mind for REW due to the complications of accurately simulating the room, its geometry and its furnishing...
-
John Mulcahy replied to the thread clicks and clock adjustment too large.You don't need to do anything with the miniDSP code, the driver already runs at very high priority. Ignore affinity.
-
John Mulcahy replied to the thread FSAF (Fast subband adaptive filtering) measurement.The input cal should be applied to the captured signal before the FSAF calculations, but I'm not doing that currently. I have omitted it...
-
John Mulcahy replied to the thread A-weighting in RTA messurment.Here is an A-weighting curve data set and an inverse A-weighting data set that could be used as a cal file.
-
John Mulcahy replied to the thread clicks and clock adjustment too large.You can try editing the target of the REW shortcut (right click on it) to: "C:\Windows\System32\cmd.exe" /c start /high "current REW...
-
John Mulcahy replied to the thread clicks and clock adjustment too large.Could be the Windows bug.
-
John Mulcahy replied to the thread Thiele Small Question.Looks good as it is.
-
John Mulcahy replied to the thread clicks and clock adjustment too large.If you have already gone into System - Power and battery and selected Best performance as the power mode that's probably all you can do...