Recent content by Joerg Schulte

I think i put another Speaker on the system for time sweep. Otherwise i let the timesweep on Aux6 Right Speaker, cause it is more away from Mic and needs no Delay. I wonder nobody tried it before and wrote some lines about.....- I´ll try it tomorrow

What about Delay on Aux5. If i set delay on aux5 maybe the time sweep(Out 31) is also delayed = System failiure?

That is not possibel. REW sends a Signal to Channel 30(Iinput X32), in REW it`s called Out30. Out5 and Out6 is like Aux-out of the Console(Output of X32). You can`t route direct to Aux 5/6. The X32 works as soundcard. There is a built in Soundcard via USB How else to measure the L / R...

I use a digital Mixing Console(Behringer X32). Behringer ECM8000 in Channel 8 as Input. Channel 30 as Output for Pink Noise R(Channel 32 for Pink Noise Left). Out 5 for left Speaker and Out 6 for right Speaker. The 2 outs to an Amp L/R. The Channel 30 is also for Acoustig timing referece...

Any Thoughts how to get the left Speaker aligned to the right Spaeker(purple Curve #3 above)? The Measurement #4 looks like #1in face of Delay-Settings....

We are getting closer to the problem. See 1st and 2nd Measurement. There we can find the Delay. I think my Problem in Understanding the next step. Put the Delay on the left Speaker, because he is closer to the Mic. After i chanched the Speaker from left to right for Timing reference(CH31) i got...

Not yet solved. I still get similar results. I use acoustic Reference. I think the problem is, that i use same Speaker for timing sweep. I take Channel 30 for left Speaker and 31 panned to the left for Reference. Channel 32 for right Speaker(more away from mic). Calculate the delay after 2...

Hi John, yes I´m routing the Out first to LR, than via Matrix1(Left) and Matrix2(right). On Matrix1 i put the Delay, because the speaker is more close to Mic.....- For Subs i use Matrix3 and 4. This Scenario on Post #12 is for Training Porpose.....- Can I expect Latency while i am using timing...

I think it's still going wrong. Delay times are similar despite delay in the channel. I tried to measure Left and Right Channel separate. I used acoustic timing reference and also loopback. Where is the mistake? See pictures in Post #12....

Still not happy with Setup: My gear: Soundcard is Mixing Desk Behringer X32 with EQs built in....Aux5 Left Speaker Aux6 right Speaker. ECM 8000 on Channel 8 Ouput: Channel 30. Loopback Mixbus Output1 to Channel 7. Tried loopback reference and acoustic reference. For trainig purpose i put the...

I tried to check it in my Home-Office. Left Speaker has 1,29 ms(0,43M) to acoustic refercence(i use X32 Desk from Behringer. One channel Output and One Channel to measure Acoustic reference) The right Speaker has -7,31 ms(-2,508 M) - The Listening Point ist not triangular for purpose. Now the...

Schönes Programm. Danke für den Hinweis...

I saw lot of Videos runnung Smaart V8. I also would try to do time-align the Subs.....- so still waiting for help, I think it would be helpfull to see SPL of Pink Noise in Realtime. :-)