Recent content by Donr

I wrote Behringer today, well actually musictribe.com. It seems there was an update to keep this exact same thing from happening. I don't know if I need the update since I can't tell what software version I have. Hopefully, they will help me. As for the X10 multiplier, that starts at 200 Hz...

I just had a brain fart. I have been inputting all my frequencies into 1 channel only be it 4 or 5 and storing them there. Now since I want to use this as parametric eq, should I only input 1 frequency per channel, store that and move on to the next? Don

Well I really don't know what is going on. I am posting 4 measurements that I took this morning with the Umik1. Two of them are without any filters but at different levels and the other 2 at same levels with the BFD in the picture. Remember, I am a noob at this and this is a sub I built to...

Well I read Brucek's review, the Behringer manual, changed presets to #5 as suggested, entered my frequencies, pushed store to register the frequency and then a 2nd time and this for every frequency. I shut it down and when I restarted it, it showed channel 5 but no frequency lights on the...

Hi. I don't know if I am in the right forum and if not, can someone move it to the right place. Anyway, I have been playing around with REW and would like to input my frequencies in the BFD. Every time I do so, I chose PA as a filter mode, then select my filter preset and, manually insert the...

Duh. I did. Fortunately, I realized that half the measurements were taken with my RS SPL meter. I took a few more yesterday with the Umik 1 at 80, 100 and 150Hz to see if it made a big difference in my DIY sub. I also took 1 of my 10" labeled Pin at 150 and then both subs at 150Hz. I left my...

Hi everyone. This is my first post and I hope I am in the right forum. I built my HT of modest dimensions (21' x10.5' x 79") back in 2003. Lately, I have been interested in learning how my room behaves and how my equipment integrates with it. I installed REW and am learning how to use it to...