Recent content by CinemaDK

  1. C

    Acoustic Panel at 1st reflection point

    The video shared by doctor speakers confirmed all the more theoretical stuff I read, and gave me that final piece of the puzzle regarding the airgab. So I am happy with my 2:1 ratio now that the panels are already built. I am just in the early phases of learning to interpret and understand the...
  2. C

    Acoustic Panel at 1st reflection point

    I have a large 1x2m window behind the speakers/screen yes, and I also have a 2x2m closet behind the listening position (LP) with glas doors. When I did my testing i slide the right panel behind the left, limiting the glas to 2x1m I am still considering whether to have blanket in front of them or...
  3. C

    Acoustic Panel at 1st reflection point

    Hmm, I had searched high and low for some actual experience with the gab then you share this video :-) just the kind of experience I was searching for. Thanks for sharing.
  4. C

    Acoustic Panel at 1st reflection point

    Thanks for replying Sonnie. I am working out of a small room with lots of hard surfaces, and this is a home cinema 9.1 setup (soon to be 7.1.2), so currently lots of reflections are a given. I started this journey because I had a muddy feel to the sound, especially speech. I have very limited...
  5. C

    Acoustic Panel at 1st reflection point

    Just recently started playing with REW measurements, and reflections. After investigating, I ended up building a 60x100 cm acoustic panel with 50mm insulation (117kg/m3 density) and 25mm air behind. I found several tests and reports stating that just a bit of air behind the insulation would...
  6. C

    SPL basic understanding and speaker placement

    Thanks JSteward for taking the time to reply. I understand, and this did all start out because I felt the sound was a bit "muddy" and stereo perspective was off. But I have little experience within this area and no good reference point, as I have never listened to a calibrated and "great"...
  7. C

    SPL basic understanding and speaker placement

    Hi everyone, I am taking my first shot at REW measuring and optimization. Been reading and analyzing away for hours, but I have to admit it´s a more difficult journey than expected :-) I do not yet have the experience or trained ears, so I am relying a lot on measurements here in the beginning...
Top Bottom