Recent content by 60secondsassassin

  1. 6

    Spacial Average Measurements

    Thanks John, Thanks Matthew, Following your advices and with the help of this page and this one, I was able to target my room mode peaks. Bass are more cleaner not faded like with LS filter and not to boomy. Really good, thanks
  2. 6

    Spacial Average Measurements

    Mea culpa. I was still bothered by the difference I had between my sweeps and MLS measurements so I reviewed all my measurement chain and dig-up a little bit more. This post on gearslutz forum putted me on the right track. For all my measurement my mic was pointing at the ceiling (vertically)...
  3. 6

    Spacial Average Measurements

    Hi John, First of, thanks for the great work you ‘ve done with REW. I’ve learned alot regarding Room correction thanks to you. Thanks also for the link it was very interesting (except for the mathemathical part where I was totally lost) and you’re right Sweep and MLS capture the same signal...
  4. 6

    Spacial Average Measurements

    Ok, after a trade with one of my acquaintance who work on the sound field about MLS, he confirmed to me that MLS doesn’t record early reflections so the impulse produced is reflections free. He also told me that the fall at 10kHz on my MLS curve (Black) is the mechanical limit of my tweeter. The...
  5. 6

    Spacial Average Measurements

    True, my room is relatively small and I have carpet on the floor. I did tried Target curves before but I was’nt really convince. The thing that was really bothered me was the differences between REW sweep and HOLM MLS impulses. I read somewhere that MLS is less sentive to early reflections...
  6. 6

    Spacial Average Measurements

    Hi Niziers, Following your advice, I did some new measurements at 3 differents points with REW Sine sweep and HOLM MLS 0.500 (I placed the mic a one point did REW record and then HOLM record without moving the mic. same for the 2 others points). That gave me 6 measurement (3 sine sweeps and 3...
  7. 6

    Spacial Average Measurements

    Hi John, Hi All, Bravo for this feature !!! Vector average work far more better than any other method (FWD, regular average...) even for amplitude correction (I don't use phase correction anyway) I just tested it using the famous Dirac live 9 points measurements and the result is really amazing...
Top Bottom