test instead of simulate

zangaidaige

New Member
Thread Starter
Joined
Sep 28, 2022
Messages
16
Hi
Is there a way to test correction filter result instead of simulate in audiolense or how do you check the result in REW or other software?
 

juicehifi

Audiolense
Staff member
Joined
Feb 5, 2018
Messages
575
You can do control measurement with rew through e.g jriver. Or you could export the simulation to REW for further examination. The simulations in Audiolense are as reliable as the measurement they are based on.
 
  • Like
Reactions: HerbertWest

zangaidaige

New Member
Thread Starter
Joined
Sep 28, 2022
Messages
16
You can do control measurement with rew through e.g jriver. Or you could export the simulation to REW for further examination. The simulations in Audiolense are as reliable as the measurement they are based on.
Thanks! just not sure the impact of jriver or software involving the process.
 

juicehifi

Audiolense
Staff member
Joined
Feb 5, 2018
Messages
575
No impact other than the convolution …. But you have to disable the level adjustment feature on JRiver’s convolver or else you may get digital clipping.
 
Top Bottom