Tannoy 3128

oldpc

Registered
Thread Starter
Joined
Apr 9, 2019
Messages
3
upload_2019-4-9_15-20-46.png


This is my Speaker measurement result. Is it good? this is the first time i have such a flat result like this.
P/s: it's under 1/12 smoothing
Thanks advance.
 
Last edited:

John Mulcahy

REW Author
Joined
Apr 3, 2017
Messages
7,212
Looks to me like you have a measurement of the speaker loaded as a cal file, what shows as your "soundcard" measurement is clearly not a soundcard result, it is a speaker measurement.
 

oldpc

Registered
Thread Starter
Joined
Apr 9, 2019
Messages
3
Looks to me like you have a measurement of the speaker loaded as a cal file, what shows as your "soundcard" measurement is clearly not a soundcard result, it is a speaker measurement.
No.1 (red) is a calibration graph, i think it's not related to my result?
 

John Mulcahy

REW Author
Joined
Apr 3, 2017
Messages
7,212
The result of the soundcard calibration is loaded as a cal file and subtracted from subsequent measurements. It should be very flat, your calibration is not correct - it is not a soundcard measurement. You need to remove that calibration file. For your measurement you can do that with the Change cal button, for future measurements you need to clear the cal file on the soundcard preferences.
 
Top Bottom