John Mulcahy
REW Author
Thread Starter
- Joined
- Apr 3, 2017
- Messages
- 7,314
Minor changes in this version as the V5.19 release approaches:
- Added Leq traces for the last minute and the last 10 minutes to the SPL logger
- Added * in front of comment lines in the impulse response text export file and a * Data start comment immediately before the data
- Trim trailing zeroes when exporting impulse response as text with window applied, but note that the data will be padded with zeroes so the length is a binary power if required
- Show an error message if the file selected for data import does not have any data REW can read
- Reset the file filter list before setting a new filter to prevent filters accumulating in the list of available filters
- The currently selected input is shown in the title of the RTA window
- Bug fix: If the previously selected input device was no longer available on startup (showing blank in the Soundcard preferences) high CPU usage would occur when attempting to capture audio
- Bug fix: SPL meter decay rates were too fast
- Bug fix: Signal generator saving to WAV file could have incorrect frequencies if the chosen sample rate differed from the current REW sample rate
- Bug fix: Measurement sweep was 3 dB higher than selected if the View option "Full scale sine rms is 0 dBFS" was selected
- Bug fix: On macOS REW would quit even if Cancel was selected on the unsaved measurement dialog
- Bug fix: The height of captured graph images was wrong if the selected image width didn't match the default width
