REW on Raspberry Pi 4

ajp7501

Registered
Thread Starter
Joined
Dec 31, 2020
Messages
3
I keep running in to the following error when attempting to install the Linux version on a Raspberry Pi 4. I'm not familiar with Linux/Raspberry PI, just started using one a month or so ago for some home theater stuff. I would like to get REW running on it if possible. Any help would be appreciated.

pi@raspberrypi:~ $ sudo ./REW_linux_5_20_3.sh
Unpacking JRE ...
Error unpacking jar files. The architecture or bitness (32/64)
of the bundled JVM might not match your machine.
 
Joined
Feb 8, 2018
Messages
250
Location
Italy
Then follow these posts
 
Joined
Feb 8, 2018
Messages
250
Location
Italy
Then follow these posts
 

ajp7501

Registered
Thread Starter
Joined
Dec 31, 2020
Messages
3
Thanks Antonio, I found your install thread shortly after posting this. I hadn’t installed Java, I misunderstood the instructions and thought it was included with newer versions of REW. I got installed and working correctly now on my raspberry pi! Appreciate all the work you’ve done on this.
 
Joined
Feb 8, 2018
Messages
250
Location
Italy
I advise you to use the 32bit architecture for the operating system and consequently also for the java virtual machine, because using the 64bit one there are problems with the generation of the waterfall graphics that cause the generation of errors and the lack of presentation.
Greetings Antonio
 

ajp7501

Registered
Thread Starter
Joined
Dec 31, 2020
Messages
3
I haven’t gone with a sound card yet….just using it via hdmi in to my xmc-2. Running simple subwoofer sweeps. I do have some issues where the Umik-1 will drop off right in the middle of a sweep and then I’ll have to rerun the sweep. The multichannel selection won’t work for me, it won’t play a steady test gone, quiet and cuts out. Not sure what that’s about yet. However, it seems to working great in stereo mode.
 
Top Bottom