REW Linux installer (requires Java 8)

REW Beta Release REW Linux installer (requires Java 8) V5.20 RC2

You Must Login or Register to Download

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Messages
3,609
John Mulcahy updated REW Linux installer (requires Java 8) with a new update entry:

REW V5.20 beta 24 Linux installer

Changes in V5.20 beta 24:
  • Added 1/A and 1/B as trace arithmetic operations - results will only be valid for measurements made over the full frequency range
  • Allow soundcard cal files for the Default output device (using the default device is not recommended)
  • Allow 2 decimal places for the impedance measurement sense resistor value
  • Use scientific notation for distortion percentages below 0.001% in the distortion graph legend
  • Bug fix: Mic cal file entries were not created...
Read the rest of this update entry...
 

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Messages
3,609
John Mulcahy updated REW Linux installer (requires Java 8) with a new update entry:

REW V5.20 beta 25 Linux installer

Changes in beta 25:
  • Added shelf filters with adjustable Q for the Generic and miniDSP equalisers. Use Q = 0.7071 for the maximum monotonic shelf slope.
  • Change text colour for graph image comments on the graph depending on the graph background
  • Added an SPL figure to the Measure dialog level check result
  • When the ASIO secondary output is enabled select an output other than the primary output
  • When filter numbers are shown above the EQ window filter adjust graph only show...
Read the rest of this update entry...
 

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Messages
3,609
John Mulcahy updated REW Linux installer (requires Java 8) with a new update entry:

REW V5.20 beta 26 Linux installer

Changes in V5.20 beta 26:
  • Allow the default audio input to be SPL calibrated
  • Show phase trace in a different hue to the SPL trace and draw it dotted to better distinguish it from the SPL trace
  • Added options in the waterfall graph controls to show or hide the time axis labels, settings label and colour bar
  • Upgraded to install4j V8 - should fix the problem with window managers and similar applications on macOS
  • Mac installers from this point onwards are notarized...
Read the rest of this update entry...
 

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Messages
3,609
John Mulcahy updated REW Linux installer (requires Java 8) with a new update entry:

REW V5.20 beta 27 Linux installer

Changes in V5.20 beta 27:
  • Adjusted fractional octave smoothing to be a little closer to a power average for larger octave fractions
  • Extended RTA THD figure to include harmonics up to the 50th
  • Added a Higher Harmonic Distortion figure to the RTA showing the contribution of the 10th and higher harmonics
  • RTA peak trace now reflects the highest levels of each block processed rather than the highest level of the averaged trace
  • Set default RTA window to Hann
  • Use the...
Read the rest of this update entry...
 

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Messages
3,609
John Mulcahy updated REW Linux installer (requires Java 8) with a new update entry:

REW V5.20 beta 28 Linux installer

Changes in V5.20 beta 28:
  • Added a Parametric Sum trace arithmetic operation that allows gain, polarity and delay to be adjusted with a live preview of the result
  • Added an option to export all impulse responses as WAV
  • Added a keyboard shortcut Ctrl+Alt+R to export RT60 data for a measurement, filename defaults to RT60_ followed by the measurement name
  • Revised RT60 calculation to better cope with very long decays
  • Added a warning about white noise stressing tweeters in the...
Read the rest of this update entry...
 

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Messages
3,609
John Mulcahy updated REW Linux installer (requires Java 8) with a new update entry:

REW V5.20 beta 29 Linux installer

Changes in V5.20 beta 29:
  • Replaced the All SPL parametric sum feature by a more general Alignment Tool
  • Added a control in the Impulse graph to offset t=0 with a live preview of the effect on phase
  • Added a control in the Impulse graph to adjust clock rate with a live preview of the effect on the impulse response and phase
  • Added a control in the Group Delay graph to offset t=0 with a live preview of the effect on phase
  • Added a control in the SPL & Phase graph to offset...
Read the rest of this update entry...
 

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Messages
3,609
John Mulcahy updated REW Linux installer (requires Java 8) with a new update entry:

REW V5.20 beta 30 Linux installer

Changes in V5.20 beta 30:
  • Added options to step in frequency or level to the Stepped Sine dialog
  • Added a stability test for the stepped sine measurement to optimise speed
  • Added a distortion threshold beyond which stepped sine measurements will be stopped. Distortion must drop below the threshold to arm it.
  • Made the stepped sine dialog non-modal so RTA window remains accessible for graph adjustments, but RTA controls are disabled to avoid changes that would interfere with...
Read the rest of this update entry...
 

Dangerous Dave

Registered
Joined
Jan 5, 2020
Messages
5
I have tried chmod 777 REW_linux_5_20_beta_31.sh
chmod 777 ./REW_linux_5_20_beta_31.sh
both report no file or directory found
I have tried redownloading the file and still no file found.
Thanks for trying but with time maybe I will figure it out. Your help is appreciated greatly and if I find the answer I will let the forum know.
 

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Messages
3,609
John Mulcahy updated REW Linux installer (requires Java 8) with a new update entry:

REW V5.20 beta 32 Linux installer

Changes in V5.20 beta 32:
  • Bug fix: Alignment tool aligned copy had the delay applied with the wrong sign
  • Bug fix: Delays in the comments for the Alignment tool aligned sum measurement had the wrong sign
  • Bug fix: Ohms axis could become selected for SPL measurements on the SPL & Phase graph when there was a mix of SPL and impedance measurements
  • Bug fix: Limits dialog was not working properly for new axis types
Read the rest of this update entry...
 

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Messages
3,609
John Mulcahy updated REW Linux installer (requires Java 8) with a new update entry:

REW V5.20 beta 33 Linux installer

Changes in V5.20 beta 33:
  • When multiple measurements are loaded load them as a set then select the last rather than adding and selecting each individually. This speeds up loading by not triggering calculations that may be required when a measurement is selected, for example generating a spectrogram when on the Spectrogram graph page
  • Suppress low quality RT60 decay results
  • Bug fix: Dragging wav files onto the RTA for processing was not working
  • Bug fix: Loading a file with...
Read the rest of this update entry...
 

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Messages
3,609
John Mulcahy updated REW Linux installer (requires Java 8) with a new update entry:

REW V5.20 beta 34 Linux installer

Changes in V5.20 beta 34:
  • Added a jitter test signal to the signal generator in the Tones group
  • Added a right click menu for the waterfall and spectrogram controls to copy and paste settings between measurements
  • Added check boxes on the waterfall and spectrogram controls to enable or disable the automatic regeneration of the plot when settings change
  • Moved the ISO 3382 parameters on the RT60 graph data panel into a separate window
  • Added an Analysis preference (selected...
Read the rest of this update entry...
 

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Messages
3,609
John Mulcahy updated REW Linux installer (requires Java 8) with a new update entry:

REW V5.20 beta 25 Linux installer

Changes in V5.20 beta 35:

The room simulator and the alignment tool have been updated for this release.

Room simulator

It has been quite a while since the room simulator was updated, so there are a basket of changes.

roomsimulator.jpg


A set of 5 presets has been added, which are remembered for subsequent startups. A comment can be entered that is saved with the presets. There is also a button to capture the current Main mic response and...
Read the rest of this update entry...
 

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Messages
3,609

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Messages
3,609
John Mulcahy updated REW Linux installer (requires Java 8) with a new update entry:

REW V5.20 beta 37 Linux installer

Changes in V5.20 beta 37:
  • Allow stepped sine levels down to -144 dBFS and end frequencies up to 80 kHz
  • When a group of measurements is loaded or saved remember the note saved with them (if any) and show it when next prompting for a note when saving all measurements as a group
  • Allow the signal generator to adapt to screen height down to 600 pixels
  • Added option to choose .txt or .frd as the extension when exporting all measurements as text
  • Bug fix: Room simulator...
Read the rest of this update entry...
 

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Messages
3,609
John Mulcahy updated REW Linux installer (requires Java 8) with a new update entry:

REW V5.20 beta 38 Linux installer

Changes in V5.20 beta 38:
  • Added a control panel for the FlexASIO driver
  • Added a bit monitor for the input data at the bottom of the main window
  • Show a warning message if using Pentium N35 with the 64-bit REW build, with recommendation to use the 32-bit build instead
  • Bug fix: RTA captures with controls showing would put controls under levels panel
Read the rest of this update entry...
 

fackamato

Registered
Joined
Aug 5, 2017
Messages
8
Hi John,

I clicked "waterfall" and got this, .mdat attached. This is in a Virtualbox VM.


Code:
REW V5.20 Beta 38 running JRE 1.8.0_242 64-bit on linux 5.5.4-1-ck, en, US-ASCII

Message:

    java.lang.InternalError: not implemented yet

Stack Trace:

not implemented yet

    sun.java2d.xr.XRSurfaceData.getRaster(XRSurfaceData.java:72)

    sun.java2d.loops.Blit$AnyBlit.Blit(Blit.java:163)

    sun.java2d.pipe.DrawImage.blitSurfaceData(DrawImage.java:959)

    sun.java2d.pipe.DrawImage.renderImageCopy(DrawImage.java:577)

    sun.java2d.pipe.DrawImage.copyImage(DrawImage.java:67)

    sun.java2d.pipe.DrawImage.copyImage(DrawImage.java:1014)

    sun.java2d.pipe.ValidatePipe.copyImage(ValidatePipe.java:186)

    sun.java2d.SunGraphics2D.drawImage(SunGraphics2D.java:3320)

    sun.java2d.SunGraphics2D.drawImage(SunGraphics2D.java:3298)

    roomeqwizard.IF.A(y:1763)

    roomeqwizard.IF.A(y:1709)

    roomeqwizard.WH.A(y:1483)

    roomeqwizard.WH.A(y:1983)

    roomeqwizard.WH.A(y:275)

    roomeqwizard.WH.paintComponent(y:3563)

    javax.swing.JComponent.paint(JComponent.java:1056)

    javax.swing.JComponent.paintChildren(JComponent.java:889)

    javax.swing.JComponent.paint(JComponent.java:1065)

    javax.swing.JLayeredPane.paint(JLayeredPane.java:586)

    javax.swing.JComponent.paintChildren(JComponent.java:889)

    javax.swing.JComponent.paint(JComponent.java:1065)

    javax.swing.JLayer.paint(JLayer.java:433)

    javax.swing.plaf.LayerUI.paint(LayerUI.java:79)

    javax.swing.plaf.ComponentUI.update(ComponentUI.java:161)

    javax.swing.JComponent.paintComponent(JComponent.java:780)

    javax.swing.JLayer.paint(JLayer.java:428)

    javax.swing.JComponent.paintChildren(JComponent.java:889)

    javax.swing.JComponent.paint(JComponent.java:1065)

    javax.swing.JComponent.paintChildren(JComponent.java:889)

    javax.swing.JComponent.paint(JComponent.java:1065)

    javax.swing.JComponent.paintChildren(JComponent.java:889)

    javax.swing.JComponent.paint(JComponent.java:1065)

    javax.swing.JComponent.paintChildren(JComponent.java:889)

    javax.swing.JComponent.paint(JComponent.java:1065)

    javax.swing.JLayer.paint(JLayer.java:433)

    javax.swing.plaf.LayerUI.paint(LayerUI.java:79)

    roomeqwizard.DB.paint(y:2131)

    javax.swing.plaf.ComponentUI.update(ComponentUI.java:161)

    javax.swing.JComponent.paintComponent(JComponent.java:780)

    javax.swing.JLayer.paint(JLayer.java:428)

    javax.swing.JComponent.paintChildren(JComponent.java:889)

    javax.swing.JComponent.paint(JComponent.java:1065)

    javax.swing.JComponent.paintChildren(JComponent.java:889)

    javax.swing.JComponent.paint(JComponent.java:1065)

    javax.swing.JLayeredPane.paint(JLayeredPane.java:586)

    javax.swing.JComponent.paintChildren(JComponent.java:889)

    javax.swing.JComponent.paint(JComponent.java:1065)

    javax.swing.JComponent.paintToOffscreen(JComponent.java:5210)

    javax.swing.BufferStrategyPaintManager.paint(BufferStrategyPaintManager.java:290)

    javax.swing.RepaintManager.paint(RepaintManager.java:1272)

    javax.swing.JComponent._paintImmediately(JComponent.java:5158)

    javax.swing.JComponent.paintImmediately(JComponent.java:4969)

    javax.swing.RepaintManager$4.run(RepaintManager.java:831)

    javax.swing.RepaintManager$4.run(RepaintManager.java:814)

    java.security.AccessController.doPrivileged(Native Method)

    java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(ProtectionDomain.java:74)

    javax.swing.RepaintManager.paintDirtyRegions(RepaintManager.java:814)

    javax.swing.RepaintManager.paintDirtyRegions(RepaintManager.java:789)

    javax.swing.RepaintManager.prePaintDirtyRegions(RepaintManager.java:738)

    javax.swing.RepaintManager.access$1200(RepaintManager.java:64)

    javax.swing.RepaintManager$ProcessingRunnable.run(RepaintManager.java:1732)

    java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:311)

    java.awt.EventQueue.dispatchEventImpl(EventQueue.java:758)

    java.awt.EventQueue.access$500(EventQueue.java:97)

    java.awt.EventQueue$3.run(EventQueue.java:709)

    java.awt.EventQueue$3.run(EventQueue.java:703)

    java.security.AccessController.doPrivileged(Native Method)

    java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(ProtectionDomain.java:74)

    java.awt.EventQueue.dispatchEvent(EventQueue.java:728)

    java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:205)

    java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:116)

    java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:109)

    java.awt.WaitDispatchSupport$2.run(WaitDispatchSupport.java:190)

    java.awt.WaitDispatchSupport$4.run(WaitDispatchSupport.java:235)

    java.awt.WaitDispatchSupport$4.run(WaitDispatchSupport.java:233)

    java.security.AccessController.doPrivileged(Native Method)

    java.awt.WaitDispatchSupport.enter(WaitDispatchSupport.java:233)

    java.awt.Dialog.show(Dialog.java:1084)

    java.awt.Component.show(Component.java:1671)

    java.awt.Component.setVisible(Component.java:1623)

    java.awt.Window.setVisible(Window.java:1014)

    java.awt.Dialog.setVisible(Dialog.java:1005)

    org.jdesktop.swingx.JXErrorPane$1.run(Unknown Source)

    org.jdesktop.swingx.JXErrorPane.showDialog(Unknown Source)

    roomeqwizard.RoomEQ_Wizard.C(y:1894)

    roomeqwizard.RoomEQ_Wizard$2.uncaughtException(y:1422)

    java.lang.ThreadGroup.uncaughtException(ThreadGroup.java:1057)

    java.lang.ThreadGroup.uncaughtException(ThreadGroup.java:1052)

    java.awt.EventDispatchThread.processException(EventDispatchThread.java:227)

    java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:219)

    java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:116)

    java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:105)

    java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:101)

    java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:93)

    java.awt.EventDispatchThread.run(EventDispatchThread.java:82)
 

Attachments

fackamato

Registered
Joined
Aug 5, 2017
Messages
8
Ah sorry, I should have searched before. Now it works (although corrupted due to the VM :)).
 

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Messages
3,609
John Mulcahy updated REW Linux installer (requires Java 8) with a new update entry:

REW V5.20 beta 39 Linux installer

Changes in V5.20 beta 39:
  • Provide more precision for the left and right window width settings
  • Moved the RTA average count panel to the bottom left corner of the graph
  • The signal generator maximum frequency is based on the chosen WAV sample rate when Save to file is selected
  • Added a button to close the FlexASIO control panel
  • Added slope choices from 6 to 48 dB/octave for the Subwoofer and Bass limited speaker targets
  • Improved scope triggering for high frequency...
Read the rest of this update entry...
 

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Messages
3,609
John Mulcahy updated REW Linux installer (requires Java 8) with a new update entry:

REW V5.20 beta 40 Linux installer

Changes in V5.20 beta 24:

Thiele-Small Parameters

  • The dual added mass method for Thiele-Small parameter estimation, developed by Claus Futtrup and Jeff Candy, has been implemented. This method provides a very accurate Bl estimate that is independent the driver impedance model and provides a "ZM*" model of the driver motional impedance around resonance, allowing accurate extraction of Mms.
  • The driver motional impedance model has been changed to accommodate...
Read the rest of this update entry...
 

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Messages
3,609
John Mulcahy updated REW Linux installer (requires Java 8) with a new update entry:

REW V5.20 beta 41 Linux installer

Changes in V5.20 beta 41:
  • Added crossover filters to the DCX equaliser option (Butterworth 6, 12, 18, 24, 48 dB/oct, Bessel 12, 24 dB/oct, Linkwitz-Riley 12, 24, 48 dB/oct)
  • Added crossover filters to the Generic equaliser option (Bessel, Butterworth and Linkwitz-Riley up to 48 dB/oct)
  • Bug fix: The measurement trace was disabled on the EQ window filter adjust graph
Read the rest of this update entry...
 

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Messages
3,609
John Mulcahy updated REW Linux installer (requires Java 8) with a new update entry:

REW V5.20 beta 42 Linux installer

Changes in V5.20 beta 42:

Impedance measurement

Impedance measurement has received some attention in this release. The impedance measurement process uses the difference between a reference channel and the measurement channel to calculate the impedance. If there are differences between the frequency responses of the channels, as there typically will be at low frequencies for AC-coupled inputs due to component tolerances, those will affect the result. The impedance of test leads...
Read the rest of this update entry...
 
Top Bottom